TSST TS-H493B HH SATA 48X CDRW/DVDROM Firmware Update
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This package provides the Windows/DOS Based TSST TS-H493B HH SATA 48X CDRW/DVDROM Firmware Update and is supported on Dimension Desktop, Inspiron Desktop, Optiplex, Precision, Studio Desktop, Vostro Desktop and XPS Desktop models that are running the following Windows Operating Systems: XP, Vista and DOS.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Fixes - Not Applicable. Enhancements - Enhanced the read stability of specific autorun media.
자세히 보기버전
D400, A03
출시일
20 10월 2008
다운로드 유형
펌웨어
범주
이동식 스토리지
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
파일 형식: ZipPack 외장형
파일 이름: TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE
파일 크기: 928.42 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Windows Vista, 32-bit
MS Windows Vista 64비트
Windows XP
Windows XP, 64-bit
Custom Instructions for TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE: Download 1. Click Download File, to download the file. 2. When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop. Install (Windows XP and Vista Users) 1. Save all work and be prepared to reboot the system after flashing the drive. Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE. 2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\R201947". Write down this path so the executable (i.e. Setup.exe) file can be found later. 3. The Self-Extractor window appears. 4. Click OK. 5. After completing the file extraction, if the Self-Extractor window is still open, close it. 6. The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch. 7. If a "Drive not found" message pops up, then the system is not detecting the TSST TS-H493B drive. Check to make sure the TSST TS-H493B drive is properly installed. 8. The SFDNWIN flash utility window will appear. Click on the round folder icon on the extreme top left corner of the SFDNWIN window. 9. Navigate to the folder "C:\DELL\DRIVERS\R201947". 10. Select 493BD400.BIN. 11. Click on the "Flash to Drive" icon next to the folder icon on the top left of the SFDNWIN window. (It is the 2nd of the three icons on the top left of the SFDNWIN window). 12. Wait for the flash process to complete. 13.Acknowledge reboot request to reboot system. Install (DOS Users) 1. Double-click the new icon on the desktop labeled TSST_TS-H493B-HH-SATA-48X-CD_A03_R201947.EXE. 2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\R201947". Write down thispath so the executable (I.e. Setup.exe) file can be found later. 3. The Self-Extractor window appears. 4. Click OK. 5. After completing the file extraction, if the Self-Extractor window is still open, close it. 6. The Windows Flash utility, SFDNWIN, for the TSST TS-H493B drive will automatically launch. Close the SFDNWIN. On other OSes, the SFDNWIN utility may fail to launch. 7. Navigate to the folder "C:\DELL\DRIVERS\R201947\DOS". 8. Copy the files "SFDNDOS.EXE" and "493BD400.BIN" to a bootable DOS floppy or flash disk. 9. Boot to DOS. 10. Navigate to the location where "SFDNDOS.EXE" and "493BD400.BIN" are located on the DOS floppy or Flash disk. 11. Enter "SFDNDOS 493BD400.BIN" at the DOS prompt. 12. Follow the instructions to complete the flash process and reboot after flash process is complete.