Dell OpenManage HIP 3.5.2 Update for NNM SE & Server Console Trap Message, A01-00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Dell OpenManage Hardware Instrumentation Package 3.5.2 Update for NNM SE &
Server Console Trap Message
Server Console Trap Message
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
This update allows PowerEdge servers to report correctly the systems management information related to power supply to the management console using the Dell OpenManage HIP version 3.5.2.
자세히 보기버전
A01-00, A01-00
출시일
13 10월 2000
다운로드 유형
애플리케이션
범주
시스템 관리
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: ZipPack 외장형
파일 이름: HIPS6up1.exe
파일 크기: 452.5 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
071ef793feac4090d4a10f183b8658ec
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Novell Netware
Windows NT 4.0
Windows 2000
To update the Dell OpenManage HIP version 3.5.2 on managed node servers
running either Microsoft Windows 2000 Server Family or Windows NT, perform
the following steps:
1. In Windows Explorer, double-click the file "dbagt001.exe" located in
the self-extracting zip file (HIPS6up1.exe).
2. Click "Update". When the update finishes, a completion message box
displays.
To update the Dell OpenManage HIP 3.5.2 on systems running Novell NetWare
version 4.x or 5.x, perform the following steps:
NOTE: If you have not rebooted your system since you first installed Dell
OpenManage HIP, the following update procedure will not work.
1. Unload the Dell baseboard agent by entering the command: "unload
dcbase".
2. Map a disk drive from a workstation to the path on the PowerEdge system
running the Novell NetWare 4.x or 5.x operating system's "sys
volume".
3. Copy the updated baseboard agent with the command:
Copy x:\bin\dcbase.nlm y:\system\dell\dcbase.nlm (where x:\ is the
location of the extracted files and y:\ is the mapped drive on the server).
4. Reboot the Dell system.
running either Microsoft Windows 2000 Server Family or Windows NT, perform
the following steps:
1. In Windows Explorer, double-click the file "dbagt001.exe" located in
the self-extracting zip file (HIPS6up1.exe).
2. Click "Update". When the update finishes, a completion message box
displays.
To update the Dell OpenManage HIP 3.5.2 on systems running Novell NetWare
version 4.x or 5.x, perform the following steps:
NOTE: If you have not rebooted your system since you first installed Dell
OpenManage HIP, the following update procedure will not work.
1. Unload the Dell baseboard agent by entering the command: "unload
dcbase".
2. Map a disk drive from a workstation to the path on the PowerEdge system
running the Novell NetWare 4.x or 5.x operating system's "sys
volume".
3. Copy the updated baseboard agent with the command:
Copy x:\bin\dcbase.nlm y:\system\dell\dcbase.nlm (where x:\ is the
location of the extracted files and y:\ is the mapped drive on the server).
4. Reboot the Dell system.