Seagate ST9160412AS/ST9250410AS/ST9320423AS/ST9500420AS Firmware Update

자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.
이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This package provides the Seagate ST9160412AS/ST9250410AS/ST9320423AS/ST9500420AS Firmware Update and is supported on Inspiron, Studio XPS Laptop, Studio Laptop and Optiplex models that are running the following Windows Operating Systems: XP, Vista and Windows 7.
권장 사항

시스템에 가장 적합한 다운로드 찾기

시스템의 최신 드라이버 정보를 보려면 제품 세부 정보를 입력해 주십시오.

지원 검색

Dell 서비스 태그 또는 모델 입력

제품을 찾아보고 싶으십니까? 제품 식별자를 입력해 주십시오. 방법 보기

이 드라이버는 호환되지 않음

이 드라이버는 선택한 제품에 적용할 수 없습니다. 다른 제품을 선택하여 이 드라이버에 대한 제품 세부 정보를 다시 입력하거나 제품 지원 페이지를 방문하여 다른 제품의 모든 드라이버를 확인해 주십시오.

추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.

수정 또는 개선한 내용

Fixes - Fixed clicking noise Enhancements - Not Applicable
자세히 보기

버전

4SDM1 or 5SDM1, A00

출시일

02 12월 2009

다운로드 유형

하드웨어

범주

스토리지

중요도

권장
Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
사용 가능한 형식

파일 형식: ZipPack 외장형
파일 이름: R250679.exe
파일 크기: 4.45 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
a7188b709e67a3cc3fdb6cc1c03253af
SHA1:
이용 불가
SHA-256:
이용 불가

다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.

기타 세부 정보

모두 표시 | 모두 숨기기
Custom Instructions for R250679.EXE: * PLEASE PRINT THE FOLLOWING INSTRUCTIONS * For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file ""C:\DELL\Drivers\R250679\Seagate Utility.ISO"" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.)(PLEASE MAKE SUREA/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. The files are located in ""C:\DELL\Drivers\R250679\Files"" directory. 4. Add the files to your bootable media and run the ""FLASH.bat"". 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the Bootable Media and power off your system.

드라이버 도움말 및 자습서