3Com 10/100 & V.90 LAN Mini-PCI, v. WAN Diag, A01
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Windows XP Modem Diagnostics for 3Com 10/100 & V.90 combo - (English only)
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Initial release for Windows XP
자세히 보기버전
WAN Diag, A01
출시일
19 10월 2001
다운로드 유형
진단 유틸리티
범주
모뎀/커뮤니케이션
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: ZipPack 외장형
파일 이름: R33503.EXE
파일 크기: 1.02 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Windows XP
1. Unzip files to hard drive or run from the program from the current
location.
2. If you unzip files to hard drive, please double click on setup.exe in
the file folder you downloaded this package to start the installation
process of the NIC diagnostics. Follow the instructions on your screen to
complete the installation.
3. If you run the program from its current location, you will be prompted
to unzip the files to a default location. For simplicity, please leave the
default location and click OK. You will see the list of files that are
contained in the package. Please double click on setup.exe to start the
installation process and follow the on-screen instructions to complete the
process.
location.
2. If you unzip files to hard drive, please double click on setup.exe in
the file folder you downloaded this package to start the installation
process of the NIC diagnostics. Follow the instructions on your screen to
complete the installation.
3. If you run the program from its current location, you will be prompted
to unzip the files to a default location. For simplicity, please leave the
default location and click OK. You will see the list of files that are
contained in the package. Please double click on setup.exe to start the
installation process and follow the on-screen instructions to complete the
process.