Dell PowerVault 51F / 56F Firmware, v. 2.5.0d, A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
PV 51F/ PV 56F FC-switch firmware.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
New version to support Dell PV and Dell|EMC.
자세히 보기버전
2.5.0d, A00
출시일
06 3월 2002
다운로드 유형
펌웨어
범주
파이버 채널
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: v2_5_0d.exe
파일 크기: 2.68 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
해당 없음
Steps to update the switch from v2.2.1c/v2.2.1a to v2.5.0d
1. Execute the self-extracting zip file v2_5_0d.exe to extract the
following files into a folder of your choice:
rshd.exe
cat.exe
v2.5.0d
Readme.doc
2. Verify that the v2.5.0d firmware file has been extracted to the same
directory as rshd.exe and cat.exe
3. Start rshd.exe from the command line.
4. Telnet and logon to the switch as Admin.
5. Execute the firmwareDownload command from the Telnet CLI of the switch.
The firmwareDownload command has be following command line format.
firmwareDownload "host IP address", "user name", "filename"
The “user name” can be set to “user”. The command will prompt you for
additional information no arguments are specified.
6. After the firmware download has been completed, reboot the switch
(using the reboot command) for the new firmware to be activated.
If you have a SAN with redundant paths I/O will failover to the alternate
path when the switch is rebooted. As an additional precaution you may want
to move all I/O to the alternate path prior to the reboot.
7. Once the switch has rebooted, login to the switch and verify the
firmware version by using the version command.
1. Execute the self-extracting zip file v2_5_0d.exe to extract the
following files into a folder of your choice:
rshd.exe
cat.exe
v2.5.0d
Readme.doc
2. Verify that the v2.5.0d firmware file has been extracted to the same
directory as rshd.exe and cat.exe
3. Start rshd.exe from the command line.
4. Telnet and logon to the switch as Admin.
5. Execute the firmwareDownload command from the Telnet CLI of the switch.
The firmwareDownload command has be following command line format.
firmwareDownload "host IP address", "user name", "filename"
The “user name” can be set to “user”. The command will prompt you for
additional information no arguments are specified.
6. After the firmware download has been completed, reboot the switch
(using the reboot command) for the new firmware to be activated.
If you have a SAN with redundant paths I/O will failover to the alternate
path when the switch is rebooted. As an additional precaution you may want
to move all I/O to the alternate path prior to the reboot.
7. Once the switch has rebooted, login to the switch and verify the
firmware version by using the version command.