Dell PowerConnect 3248, v. 1.31, A01
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
General Discription
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
권장 사항
자동 스캔을 사용하려면 관리자 권한으로 Windows에 로그인하십시오. 관리자 권한으로 이미 로그인한 상태에서 이 메시지가 표시되었다면 재부팅하시기 바랍니다. 시스템이 IT 관리자에 의해 관리되고 있으며, 기능이 제한될 수 있습니다.
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
None
자세히 보기버전
1.31, A01
출시일
25 7월 2002
다운로드 유형
애플리케이션
범주
네트워크
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
사용 가능한 형식
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: PWRNTSM.zip
파일 크기: 5.1 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
설치 방법
*****This file contains a compressed (or zipped) set of files. You will
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.