Seagate Cheetah VI 10K 146LP U320 36GB 68Pin, Cheetah VI 10K 146LP U320 36GB 80Pin, Cheetah VI 10K 146LP U320 73GB 68Pin, Cheetah VI 10K 146LP U320 73GB 80Pin, Cheetah VI 10K 146LP U320 146GB 68Pin, Cheetah VI 10K 146LP U320 146GB 80Pin, v.DS09, A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This utility updates the SCSI Seagate Cheetah 10K Drives firmware to DS09. This version addresses compatibility issues when drives are installed in U320 capable PV220/PV221S enclosures and other general quality improvements.
The following Seagate drives are supported in this release:
Seagate Model # ST3146807LW
Seagate Model # ST3146807LC
Seagate Model # ST336607LW
Seagate Model # ST336607LC
Seagate Model # ST373307LW
Seagate Model # ST373307LC
The following Seagate drives are supported in this release:
Seagate Model # ST3146807LW
Seagate Model # ST3146807LC
Seagate Model # ST336607LW
Seagate Model # ST336607LC
Seagate Model # ST373307LW
Seagate Model # ST373307LC
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
This version corrects issues found with drives going intermittently Off-line, or a hang condition with drives installed in U320 capable PV220/PV221S systems and introduces other quality improvements.
자세히 보기버전
DS09, A00
출시일
26 1월 2004
다운로드 유형
유틸리티
범주
SCSI 드라이브
중요도
긴급Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
파일 형식: 자동 압축 해제 zip 내부의 하나 이상의 자동 압축 해제 디스크 이미지
파일 이름: BR71432.exe
파일 크기: 873.65 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 두 번 클릭하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Red Hat® Enterprise Linux 2.1
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Windows Server 2003
Windows 2000
Cheetah VI 10K 146LP U320 146GB 68Pin
Cheetah VI 10K 146LP U320 146GB 80Pin
Cheetah VI 10K 146LP U320 36GB 68Pin
Cheetah VI 10K 146LP U320 36GB 80Pin
Cheetah VI 10K 146LP U320 73GB 68Pin
Cheetah VI 10K 146LP U320 73GB 80Pin
Custom Instructions for BR71432.exe:
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. After all the files have been copied to the last, click Finish.
Installation:
NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
1. LSI 1020 for PE1600 .....................................Controller
2. LSI 1030 for PE2600 .....................................Controller
3. 7890, 7899, 2940U2W family ..............................Controller
4. PERC2, PERC2/Si, PERC3/Si, PERC3/Di......................Controller
5. PERC3/SC PERC3/DC, PERC3/DCL, PERC3/QC...................Controller
6. PERC4/Di, PERC4/SC, PERC4/DC.............................Controller
If PERC3/xx, PERC4/xx is selected, the user is prompted to select
the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ?
2)Update Drives connected to Channel 1 of PERC3 ?
3)Update Drives connected to Channel 2 of PERC3 ?
4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Seagate U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. After all the files have been copied to the last, click Finish.
Installation:
NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
1. LSI 1020 for PE1600 .....................................Controller
2. LSI 1030 for PE2600 .....................................Controller
3. 7890, 7899, 2940U2W family ..............................Controller
4. PERC2, PERC2/Si, PERC3/Si, PERC3/Di......................Controller
5. PERC3/SC PERC3/DC, PERC3/DCL, PERC3/QC...................Controller
6. PERC4/Di, PERC4/SC, PERC4/DC.............................Controller
If PERC3/xx, PERC4/xx is selected, the user is prompted to select
the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ?
2)Update Drives connected to Channel 1 of PERC3 ?
3)Update Drives connected to Channel 2 of PERC3 ?
4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Seagate U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.