LSI Logic Ultra 320 SCSI Adapter Non-RAID, v.1.09.11(IA-64), A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
LSI Logic PCI SCSI MPT Driver for IA-64 Windows 2003 v1.09.11
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Changes applicable to MPT IO 1020/1030 solutions since native (1.08.18) W2K3 driver:
________________________________
• Added handling for getting a check condition on an OS issued request sense command (no SenseInfoBuffer).
• Fixed check of ImageSize for F/W download boot in MPI_DIAG_RESET
• Fixed data buffer address calculation for MPI pass through writes on 64-bit platforms (would cause improper data to be written on MPI IOCTL calls).
• Fixed problem with access to Manufacturing Page 0 if no NVDATA available (would result in a bluescreen if valid NVDATA was not available).
• Added I/O throttling per device to avoid overrunning device queue depths (eliminate multiple Queue Full returns and Event 11/15 errors in event log).
• Changed AdapterRestart routine to perform Domain Validation on parallel SCSI. (ensures externally powered U320 drives run at U320 speed on Resume from Standby)
• Added checks for NULL pointers on all cached MPI config pages.
• Added unmasking of interrupts in LSImpiIsr when processing a doorbell interrupt
• Check SCSI Port Page 2 Domain Validation bits to either disable Domain Validation or limit Domain Validation to Inquiry only checks.
• Changed LSImpiReset routine to always poll on ISR until reset reply is received.
자세히 보기________________________________
• Added handling for getting a check condition on an OS issued request sense command (no SenseInfoBuffer).
• Fixed check of ImageSize for F/W download boot in MPI_DIAG_RESET
• Fixed data buffer address calculation for MPI pass through writes on 64-bit platforms (would cause improper data to be written on MPI IOCTL calls).
• Fixed problem with access to Manufacturing Page 0 if no NVDATA available (would result in a bluescreen if valid NVDATA was not available).
• Added I/O throttling per device to avoid overrunning device queue depths (eliminate multiple Queue Full returns and Event 11/15 errors in event log).
• Changed AdapterRestart routine to perform Domain Validation on parallel SCSI. (ensures externally powered U320 drives run at U320 speed on Resume from Standby)
• Added checks for NULL pointers on all cached MPI config pages.
• Added unmasking of interrupts in LSImpiIsr when processing a doorbell interrupt
• Check SCSI Port Page 2 Domain Validation bits to either disable Domain Validation or limit Domain Validation to Inquiry only checks.
• Changed LSImpiReset routine to always poll on ISR until reset reply is received.
버전
1.09.11(IA-64), A00
출시일
04 6월 2004
다운로드 유형
드라이버
범주
SCSI 비 RAID
중요도
긴급Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: AW2K3GOB.exe
파일 크기: 95 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Windows Server 2003
Ultra 320 SCSI Adapter Non-RAID
Instructions for AW2K3GOB.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.