Maxtor Cobra 10K U320 36GB 68 Pin, Cobra 10K U320 36GB 80 Pin, Cobra 10K U320 73GB 68 Pin, Cobra 10K U320 73GB 80 Pin, Cobra 10K U320 146GB 68 Pin, Cobra 10K U320 146GB 80 Pin, v.DFX8, A02
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This utility updates Atlas 10K IV drives from DFM0 to DFX8 version.
This utility is for the following Maxtor drives:
8W581 - HD,146GB,SCSI,U320,10K,68P,MXT
C4357 - HD,146GB,SCSI,U320,10K,68P,MXT
U3987 - HD,146GB,SCSI,U320,10K,80P,MXT
7W584 - HD,146GB,SCSI,U320,10K,80P,MXT
7W578 - HD,36GB,SCSI,U320,10K,68P,MXT
U3985 - HD,36GB,SCSI,U320,10K,68P,MXT
Y3397 - HD,36GB,SCSI,U320,10K,80P,MXT
5W925 - HD,36GB,SCSI,U320,10K,80P,MXT
5W913 - HD,73GB,SCSI,U320,10K,68P,MXT
Y3400 - HD,73GB,SCSI,U320,10K,68P,MXT
C4354 - HD,73GB,SCSI,U320,10K,80P,MXT
8W570 - HD,73GB,SCSI,U320,10K,80P,MXT
This utility is for the following Maxtor drives:
8W581 - HD,146GB,SCSI,U320,10K,68P,MXT
C4357 - HD,146GB,SCSI,U320,10K,68P,MXT
U3987 - HD,146GB,SCSI,U320,10K,80P,MXT
7W584 - HD,146GB,SCSI,U320,10K,80P,MXT
7W578 - HD,36GB,SCSI,U320,10K,68P,MXT
U3985 - HD,36GB,SCSI,U320,10K,68P,MXT
Y3397 - HD,36GB,SCSI,U320,10K,80P,MXT
5W925 - HD,36GB,SCSI,U320,10K,80P,MXT
5W913 - HD,73GB,SCSI,U320,10K,68P,MXT
Y3400 - HD,73GB,SCSI,U320,10K,68P,MXT
C4354 - HD,73GB,SCSI,U320,10K,80P,MXT
8W570 - HD,73GB,SCSI,U320,10K,80P,MXT
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
The firmware change corrects issues such as drive hangs, improved error handling and performance enhancements
자세히 보기버전
DFX8, A02
출시일
19 5월 2004
다운로드 유형
펌웨어
범주
SCSI 드라이브
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
파일 형식: 자동 압축 해제 zip 내부의 하나 이상의 자동 압축 해제 디스크 이미지
파일 이름: BR77299.exe
파일 크기: 829.52 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 두 번 클릭하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Red Hat® Enterprise Linux 2.1
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Windows Server 2003
Windows 2000
Cobra 10K U320 146GB 68 Pin
Cobra 10K U320 146GB 80 Pin
Cobra 10K U320 36GB 68 Pin
Cobra 10K U320 36GB 80 Pin
Cobra 10K U320 73GB 68 Pin
Cobra 10K U320 73GB 80 Pin
Custom Instructions for BR77299.exe:
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. After all the files have been copied to the last, click Finish.
Installation:
NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
1. LSI 1020 for PE1600 .....................................Controller
2. LSI 1030 for PE2600 .....................................Controller
3. 7890, 7899, 2940U2W family ..............................Controller
4. PERC2, PERC2/Si, PERC3/Si, PERC3/Di......................Controller
5. PERC3/SC PERC3/DC, PERC3/DCL, PERC3/QC...................Controller
6. PERC4/Di, PERC4/SC, PERC4/DC.............................Controller
If PERC3/xx, PERC4/xx is selected, the user is prompted to select
the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ?
2)Update Drives connected to Channel 1 of PERC3 ?
3)Update Drives connected to Channel 2 of PERC3 ?
4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Maxtor U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. After all the files have been copied to the last, click Finish.
Installation:
NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
1. LSI 1020 for PE1600 .....................................Controller
2. LSI 1030 for PE2600 .....................................Controller
3. 7890, 7899, 2940U2W family ..............................Controller
4. PERC2, PERC2/Si, PERC3/Si, PERC3/Di......................Controller
5. PERC3/SC PERC3/DC, PERC3/DCL, PERC3/QC...................Controller
6. PERC4/Di, PERC4/SC, PERC4/DC.............................Controller
If PERC3/xx, PERC4/xx is selected, the user is prompted to select
the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ?
2)Update Drives connected to Channel 1 of PERC3 ?
3)Update Drives connected to Channel 2 of PERC3 ?
4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Maxtor U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.