Dell OpenManage Array Manager, v.3.5.0.555.4, A02
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Array Manager software provides a comprehensive storage management solution in an integrated, graphical view. From a single location, Array Manager enables you to configure and manage local and remote storage attached to a server, while the server is online and continuing to process requests.
권장 사항
자동 스캔을 사용하려면 관리자 권한으로 Windows에 로그인하십시오. 관리자 권한으로 이미 로그인한 상태에서 이 메시지가 표시되었다면 재부팅하시기 바랍니다.
시스템이 IT 관리자에 의해 관리되고 있으며, 기능이 제한될 수 있습니다.
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
The following issues are corrected in Array Manager Version 3.5:
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
자세히 보기
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
버전
3.5.0.555.4, A02
출시일
09 8월 2004
다운로드 유형
애플리케이션
범주
시스템 관리
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
사용 가능한 형식
중요 정보 보기
파일 형식:
로컬 디스크로 직접 파일 압축 해제
파일 이름:
a350a02.exe
파일 크기:
78 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식:
외부 릴리스 정보
파일 이름:
rdm350.txt
파일 크기:
48.97 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
중요 정보
Array Manager cannot be installed on a system that has the ASPI 4.7.x driver installed. If you have the ASPI 4.7.x driver installed on your system, you need to remove this driver and install the ASPI 4.6 driver.You can do this by downloading the ASPI 4.6 package from http://support.dell.com. The ASPI 4.6 package uninstalls the ASPI 4.7.x driver and installs the ASPI 4.6 driver. Refer to the documentation of any other applications installed on the system to see if those applications have known problems with the ASPI 4.6 driver.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press when the following option appears on screen: <<< Press for Adaptec RAID Configuration Utility! >>> 2.) Using the arrow keys, select SCSISelect Utility and press ENTER. 3.) Using the arrow keys, select Controller Configuration and press ENTER. 4.) Using the arrow keys, select 30 Second Config Change Timeout and press ENTER. 5.) Using the arrow keys, select ENABLED 6.) Press ESC to exit menu and select YES when prompted to save the changes made. 7.) Press ESC twice and select YES when prompted to save the changes made, the system will reboot with new settings.
****************************************************************************
Please see the readme for more important info.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press
****************************************************************************
Please see the readme for more important info.
지원되는 운영 체제
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Powered
설치 방법
Custom Instructions for a350a02.exe:
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)