Adaptec 39160 SCSI - Family Manager Set, v.FMS4.0 SP5, A11
AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Adaptec 39160/7892/7899 SCSI Controller Driver Set
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire
Ce pilote n’est pas compatible
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez. Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
This driver merges the previous Dell 'Special' code stream and the Adaptec 'Service Pack' code
stream - as of this release Dell A11 = Adaptec FMS 4.0 SP5.
S1 - S5: this is a change list/history applicable to the Dell code stream, and is applicable to
Windows 2000 only:
S1: Based on Cyrax standard release, added fix for Non-Tag Target Timeout.
S2: Based on S1, added fix for Slow tape performance.
S3: Based on Cyrax standard release, added fix for Slow tape performance.
S4: Based on S2, added fix for Request Sense Timeout in Non-tag code path.
S5: Based on S3
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer
rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in Windows 2000 Event log when using Tape
Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
· Added fix for Request Sense Timeout in Non-tag code path.
· Command timeout when installing Dell management Software under Windows 2000.
SP1 - SP4: this is a change list/history applicable to the Adaptec Service Pack code stream, and
only covers changes made to Windows 2000 or Windows 2003 drivers:
Service Pack 1
Windows 2000:
· Fixed Issue: The termination setting for channel B on the AIC-7899 was being set
incorrectly. The problem is seen only on motherboards in which the AIC-7899 has been designed to
control the termination for channel A and Motherboards that do not use the AIC-7899 to control the
termination of the bus will not see this problem. Adaptec host adapters do not exhibit this
problem either.
Service Pack 2
Netware fixes only; no Windows 2000 or 2003 changes.
Service Pack 3
Windows 2000:
· Fixed Issue: With non-disk device such as HP Ultrium Tape drive, the driver did not
negotiate transfer rate, all subsequent IO transfers occurred as Async.
· Tape IO Test certification failure fix.
Service Pack 4
Windows 2000:
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer
rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in win2k Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
En savoir plusstream - as of this release Dell A11 = Adaptec FMS 4.0 SP5.
S1 - S5: this is a change list/history applicable to the Dell code stream, and is applicable to
Windows 2000 only:
S1: Based on Cyrax standard release, added fix for Non-Tag Target Timeout.
S2: Based on S1, added fix for Slow tape performance.
S3: Based on Cyrax standard release, added fix for Slow tape performance.
S4: Based on S2, added fix for Request Sense Timeout in Non-tag code path.
S5: Based on S3
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer
rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in Windows 2000 Event log when using Tape
Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
· Added fix for Request Sense Timeout in Non-tag code path.
· Command timeout when installing Dell management Software under Windows 2000.
SP1 - SP4: this is a change list/history applicable to the Adaptec Service Pack code stream, and
only covers changes made to Windows 2000 or Windows 2003 drivers:
Service Pack 1
Windows 2000:
· Fixed Issue: The termination setting for channel B on the AIC-7899 was being set
incorrectly. The problem is seen only on motherboards in which the AIC-7899 has been designed to
control the termination for channel A and Motherboards that do not use the AIC-7899 to control the
termination of the bus will not see this problem. Adaptec host adapters do not exhibit this
problem either.
Service Pack 2
Netware fixes only; no Windows 2000 or 2003 changes.
Service Pack 3
Windows 2000:
· Fixed Issue: With non-disk device such as HP Ultrium Tape drive, the driver did not
negotiate transfer rate, all subsequent IO transfers occurred as Async.
· Tape IO Test certification failure fix.
Service Pack 4
Windows 2000:
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer
rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in win2k Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
Version
FMS4.0 SP5, A11
Date de publication :
23 ماي 2003
Type de téléchargement
Pilote
Catégorie
SCSI non RAID
Importance
En optionDell Technologies recommande de consulter cette mise à jour pour déterminer si elle s’applique à votre système. La mise à jour comprend des modifications n’ayant d’impact que sur certaines configurations, ou propose de nouvelles fonctionnalités pouvant s’appliquer ou non à votre environnement.
Formats disponibles
Format de fichier : Extrait des fichiers directement vers le disque local
Nom du fichier : 2k2k3A11.exe
Taille du fichier : 145.76 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier comprend une archive de fichiers qui peut être décompressée sur un répertoire du disque dur. L’installation peut être effectuée à partir de ce répertoire.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
Non disponible
SHA1 :
Non disponible
SHA-256 :
Non disponible
En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)
Systèmes d’exploitation pris en charge
Windows Server 2003
Windows 2000
Windows Powered
S'applique à
39160 SCSI - Family Manager Set
39160 SCSI Controller - Firmware
Instructions d’installation
Custom Instructions for 2k2k3A11.exe:
Download
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save and click OK.
The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select
Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon
appears on your desktop.
Diskette Creation
1. Insert a floppy diskette into the floppy drive.
2. Double-click the new icon on the desktop. The Self-Extractor window
appears.
3. Specify the floppy drive as the location to upzip the files.
4. Click on the unzip button to extract files.
IMPORTANT NOTE: If you are running Open Manage Array Manager
v3.2 or higher under Windows 2000, to avoid a potential Blue Screen,
prior to updating the driver you will need to:
1. Disable the SCSI subsystem provider in the Array Manager Utilities
before upgrading the driver. Please refer to the Array Manager
documentation for details on how to do this.
2. Once the SCSI provider is disabled, you should then navigate to the
\WINNT\SYSTEM32\DRIVERS folder and temporarily rename
ASPI32.SYS to ASPI32.XXX, then reboot the system before proceeding
with the upgrade.
3. Following the upgrade, you will need to reboot again before re-
naming ASPI32.SYS back to its' original name, then finally re-enabling
the SCSI provider.
Updating the driver on an Existing Windows 2000/2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. From the desktop, right-click the My Computer icon.
2. Left-click Manage.
3. Click Device Manage.
4. Double-click SCSI and RAID Controllers.
A List of all currently installed SCSI devices appears.
5. Double-click the appropriate SCSI controller (such as 39160
Controller) - in the case of a dual channel controller, there will be two
devices listed (one for each channel). The driver will have to be
updated separately for each channel.
6. Select the Driver tab.
7. Select Update Driver.
The Update Device Driver Wizard appears.
8. Click Next.
9. Click 'Display a list of known drivers for this device so
I can choose a specific driver'
10. Click Next.
The Upgrade Device Driver Wizard appears.
11. Click 'Have Disk' button.
The 'Install from Disk' dialog appears.
11. Insert the driver diskette created above.
12. Click 'Browse' button
Locate File dialog appears
13. Use pull-down box to find floppy drive
14. Double-click on appropriate (WIN2000 or WIN2003) folder
ADPU160M.INF should appear in 'File Name' box - if not, select it
15. Click 'Open' button
'Install From Disk' dialog reappears with correct path displayed
16. Click 'OK'
Upgrade Device Driver Wizard reappears.
17. Choose appropriate device from list (7892, 7899 or 39160)
18. Click 'Next'
19. Click 'Next' again to confirm choice and upgrade driver
20. Close Wizard by clicking Finish
21. Close Properties Dialog for device.
22. Do not reboot system yet.
23. Repeat steps 5-22 for second channel after Device Manager
refreshes.
24. Reboot System to complete upgrade.
Download
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I
Accept this Agreement.
3. When the File Download window appears, click Save and click OK.
The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select
Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon
appears on your desktop.
Diskette Creation
1. Insert a floppy diskette into the floppy drive.
2. Double-click the new icon on the desktop. The Self-Extractor window
appears.
3. Specify the floppy drive as the location to upzip the files.
4. Click on the unzip button to extract files.
IMPORTANT NOTE: If you are running Open Manage Array Manager
v3.2 or higher under Windows 2000, to avoid a potential Blue Screen,
prior to updating the driver you will need to:
1. Disable the SCSI subsystem provider in the Array Manager Utilities
before upgrading the driver. Please refer to the Array Manager
documentation for details on how to do this.
2. Once the SCSI provider is disabled, you should then navigate to the
\WINNT\SYSTEM32\DRIVERS folder and temporarily rename
ASPI32.SYS to ASPI32.XXX, then reboot the system before proceeding
with the upgrade.
3. Following the upgrade, you will need to reboot again before re-
naming ASPI32.SYS back to its' original name, then finally re-enabling
the SCSI provider.
Updating the driver on an Existing Windows 2000/2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. From the desktop, right-click the My Computer icon.
2. Left-click Manage.
3. Click Device Manage.
4. Double-click SCSI and RAID Controllers.
A List of all currently installed SCSI devices appears.
5. Double-click the appropriate SCSI controller (such as 39160
Controller) - in the case of a dual channel controller, there will be two
devices listed (one for each channel). The driver will have to be
updated separately for each channel.
6. Select the Driver tab.
7. Select Update Driver.
The Update Device Driver Wizard appears.
8. Click Next.
9. Click 'Display a list of known drivers for this device so
I can choose a specific driver'
10. Click Next.
The Upgrade Device Driver Wizard appears.
11. Click 'Have Disk' button.
The 'Install from Disk' dialog appears.
11. Insert the driver diskette created above.
12. Click 'Browse' button
Locate File dialog appears
13. Use pull-down box to find floppy drive
14. Double-click on appropriate (WIN2000 or WIN2003) folder
ADPU160M.INF should appear in 'File Name' box - if not, select it
15. Click 'Open' button
'Install From Disk' dialog reappears with correct path displayed
16. Click 'OK'
Upgrade Device Driver Wizard reappears.
17. Choose appropriate device from list (7892, 7899 or 39160)
18. Click 'Next'
19. Click 'Next' again to confirm choice and upgrade driver
20. Close Wizard by clicking Finish
21. Close Properties Dialog for device.
22. Do not reboot system yet.
23. Repeat steps 5-22 for second channel after Device Manager
refreshes.
24. Reboot System to complete upgrade.
Aide et didacticiels sur les pilotes
Pour plus de téléchargements, accédez à Pilotes et téléchargements. Pour obtenir de l’aide sur l’utilisation des informations affichées sur cette page, consultez la rubrique Aide et didacticiels pour les pilotes.