AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Dell CERC SATA 1.5/2s RAID Controller Device Driver for Windows Server 2000 and Windows Server 2003 (32-bit).
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
- Corrects potential data corruption issues when using Seagate hard drives. - Corrects potential controller lockups if hard drives incorrectly set certain status flags.
Dell Technologies recommande vivement d’effectuer cette mise à jour importante dès que possible. La mise à jour contient des correctifs critiques et des modifications permettant d’améliorer le fonctionnement, la fiabilité et la stabilité de votre système Dell. Elle peut également inclure des correctifs de sécurité et d’autres améliorations de fonctionnalités.
Format de fichier :Package de mise à jour pour Microsoft Windows 32 bits
Nom du fichier :DRVR_WIN_R115189.EXE
Taille du fichier :1.21 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les packages DUP (Dell Update Packages) au format Microsoft Windows 32 bits ont été conçus pour fonctionner sur les systèmes d’exploitation Microsoft Windows 64 bits. Les packages DUP (Dell Update Packages) au format Microsoft Windows 64 bits fonctionnent uniquement sur les systèmes d’exploitation Microsoft Windows 64 bits. Assurez-vous de choisir la mise à jour de pilote de périphérique adaptée à votre système d’exploitation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
5F67F2F2AD515743FA1A0307C4F8AD9F
SHA1 :
Non disponible
SHA-256 :
Non disponible
Format de fichier :ZipPack externe
Nom du fichier :R115189.EXE
Taille du fichier :251.1 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk. 2. Start installing OS. 3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers. 4. When the Windows Setup window is displayed, Press S to specify additional device(s). 5. Insert the driver diskette and press ENTER. 6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices. 7. If there are any additional devices to be installed, specify them now by pressing S. 8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation:
1. Open "Device Manager". 2. Open "SCSI and RAID Contollers". 3. Select "Adaptec Embedded Serial ATA HostRAID Controller". 4. Select the "Driver" tab. 5. Click on "Update Driver". 6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step. 7. Choose "Install from a list of specific location (Advanced)", and click "Next". 8. Check "Include this location in the search:". 9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next". 10. Click "Finish". 11. If prompted to reboot to complete update, do so.
Dell Update Package Instructions for DRVR_WIN_R115189.EXE:
Download
1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.