Dell MD3000i iSCSI RAID Controller, v.07.35.39.64, A13
INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
#######################################################################
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Recomendado
Encuentre la mejor descarga para su sistema
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaBuscar soporte
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema. El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Más información-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Versión
07.35.39.64, A13
Fecha de publicación
26 sept 2011
Tipo de descarga
Firmware
Categoría
RAID iSCSI
Importancia
RecomendadoDell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles
Formato de archivo: Extrae archivos directamente al disco local
File Name: MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip
Tamaño del archivo: 14.2 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo de archivos que se pueden descomprimir a un directorio en el disco duro. La instalación puede realizarse desde ese directorio.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
d907852c2f8ed6c6a9e779293fffd40f
SHA1:
No disponible
SHA-256:
No disponible
Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Se aplica a
ASSY,ENCL,CTL,DX,MD3000I
ASSY,ENCL,CTL,SPL,MD3000I
Instrucciones de instalación
Custom Instructions for MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip:
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Ayuda y tutoriales para controladores
Para obtener más descargas, vaya a Controladores y descargas. Para obtener ayuda con el uso de la información en esta página, visite Tutoriales y ayuda sobre controladores.