Dell CMC, versión 3.02, A01

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Workaround for 2700W PSU 0G803N defect DF414125
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

Fixes and Enhancements in version 3.02 over 3.01
--------------------------------------
* Fix for racadm testfeature command

* Fix for power-up failure on M610X after OS crash. BIOS halts system
with error "Failed to allocate sufficient blade power".

* Link tuning updates for Dell 10GbE XAUI PTM, Dell M5424-n IOM, Qlogic FC8 mezzanine card
and Brocade Superhawk2 switch
Más información

Versión

3.02, A01

Fecha de publicación

06 oct 2010

Tipo de descarga

Firmware

Categoría

Administración de sistemas de chasis

Importancia

Recomendado
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles

Formato de archivo: Notas de versiones externas
File Name: CMC-3.02-A01-README.txt
Tamaño del archivo: 8.38 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo contiene texto sin formato que se puede ver con un editor de texto estándar.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
939aea001ff353844f2161e7f49d02e1
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Los paquetes de Dell para la Controladora de administración de chasis (<i>Chassis Management Controller</i>, CMC) garantizan que se satisfagan los criterios de validación específicos antes de realizar actualizaciones
File Name: firmimg-3.02-A01.cmc
Tamaño del archivo: 33.71 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de Dell para la Controladora de administración de chasis (Chassis Management Controller, CMC) garantizan que se satisfagan los criterios de validación específicos antes de realizar actualizaciones.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
f9f6e715a458a0c5355c038a7fe01f8b
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: La firma correspondiente a paquetes de Dell para la Controladora de administración de chasis (<i>Chassis Management Controller</i>, CMC) puede ser usada para autenticar la identidad de Dell™ en el paquete correlacionado para CMC. Puede descargar la clave pública de GnuPG de Dell desde el sitio web de Dell | Linux
File Name: firmimg-3.02-A01.cmc.sign
Tamaño del archivo: 194 Bytes
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
La firma correspondiente a paquetes de Dell para la Controladora de administración de chasis (Chassis Management Controller, CMC) se puede usar para autenticar la identidad de Dell en el paquete correlacionado para CMC. Puede descargar la clave pública de GnuPG de Dell desde el sitio web de Dell | Linux.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
54381f40f3de379de83dde1da3d1d7d9
SHA1:
No disponible
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
Custom Instructions for firmimg-3.02-A01.cmc:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Custom Instructions for firmimg-3.02-A01.cmc.sign:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Verifying the Digital Signature
A digital signature is used to authenticate the identity of the signer of a file and to certify that the original content of the file has not been modified since it was signed.
If you do not already have it installed on your system, you must install the Gnu Privacy Guard (GPG) to verify the CMC Firmware digital signature. To use the standard verification procedure, perform the following steps:
1. Get the Dell Linux public GnuPG key, if you do not already have it. You can download it by navigating to lists.us.dell.com and clicking the Dell Public GPG key link or right click on the link and select “Save Target as…” This will save the Dell Public GPG key into a file linux-security-publickey.txt.
2. Import the public key to your gpg trust database by running the following command:
gpg --import
NOTE: You must have your private key to complete the process.
3. To avoid a distrusted-key warning, validate the public key by its fingerprint before you use it.
a. Type the following command:
gpg --edit-key 23B66A9D
b. Within the GPG key editor, type fpr. The following message appears:
pub 1024D/23B66A9D 2001-04-16 Dell, Inc. (Product Group)
Primary key fingerprint: 4172 E2CE 955A 1776 A5E6 1BB7 CA77 951D 23B6 6A9D
If the fingerprint of your imported key is the same as the key owner's, you have a correct copy of the key. You can verify the key's owner in person, over the phone, or by any other means that guarantees that you are communicating with the key's true owner.
You must import and validate the public key only once.
4. Obtain the CMC Firmware and its associated signature file from the Dell Support website at support.dell.com/support/downloads.
NOTE: Each CMC Firmware has a separate signature file, which is included in the zip package of the firmware. You need both the CMC Firmware and its associated signature file for verification. By default, the signature file is named the same as the CMC firmware filename with a .sign extension. For example, CMC firmware is named firmimg.cmc, its signature filename is firmimg.cmc.sign. To download the files, right-click on the download link and use the "Save Target As..." file option. Once downloaded extract these files to a known location.
5. Verify the CMC firmware:
NOTE: If you are in the GPG key editor, please make sure to exit from it before running the verify command.
gpg --verify

The following example illustrates the steps that you follow to verify a CMC Firmware package:
1. Download the following two files from support.dell.com:
- firmimg-3.02-A01.cmc.sign
- firmimg-3.02-A01.cmc
Import the public key by running the following command line:
gpg --import
The following output message appears:
gpg: key 23B66A9D: "Dell Computer Corporation (Linux Systems Group) " imported
gpg: Total number processed: 1
gpg: unchanged: 1
If you have already run this once, then the following output message appears.
gpg: key 23B66A9D: "Dell Computer Corporation (Linux Systems Group) " not changed
gpg: Total number processed: 1
gpg: unchanged: 1
3. Validate the Dell public key, if you haven't done so previously, by typing the following command:
gpg --edit-key 23B66A9D
At the command prompt, type the following commands:
fpr

4. Verify the CMC Firmware digital signature by running the following command:
gpg --verify firmimg-3.02-A01.cmc.sign firmimg-3.02-A01.cmc
The following output message appears:
gpg: Signature made [date] using DSA key ID 23B66A9D
gpg: Good signature from "Dell, Inc. (Product

Ayuda y tutoriales para controladores