AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Dell PowerEdge Expandable RAID Controller 4/DC and 4/SC Firmware Update
Version: 352D
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Fixes:
1. Addresses a problem that may occur if a drive fails with in seconds after another drive completes a rebuild. 2. Fixed issue on PERC Controllers where VMFS Volumes go missing in VMware ESX environments after updating firmware from version 351X and earlier to 352B Note: Updating to (352D from a system that was installed onto 352B) will require customers to resignature the volumes in order to have VMware to recognize the volumes. Affected upgrade scenarios: a. Upgrade from 351X to 352B b. Upgrade from 352B to 352D c. Upgrade from 351X to 352B then to 352D
Unaffected upgrade scenarios: a. Upgrade from 351X and earlier to 352D
Dell Technologies raadt u sterk aan deze belangrijke update zo spoedig mogelijk uit te voeren. De update bevat essentiële bugfixes en wijzigingen om de functionaliteit, betrouwbaarheid en stabiliteit van uw Dell systeem te verbeteren. De update bevat mogelijk ook beveiligingsoplossingen en andere functieverbeteringen.
Bestandsindeling:Updatepakket voor MS Windows 32-bits
Bestandsnaam:RAID_FRMW_WIN_R151923.EXE
Bestandsgrootte:5.08 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dell Update Packages in Microsoft Windows 32-bits indeling zijn ontworpen om te worden uitgevoerd in Microsoft Windows 64-bits besturingssystemen. Dell Update Packages in Microsoft Windows 64-bits indeling kunnen alleen worden uitgevoerd in Microsoft Windows 64-bits besturingssystemen. Bij het selecteren van een stuurprogramma-update dient u het stuurprogramma te kiezen dat bij uw besturingssysteem past.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
C80B13D89FEC51D92D8A2FFC9896786B
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam:BR151923.exe
Bestandsgrootte:1.2 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
2d2e4802c78af52d1f48c55088c140e8
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Een GnuPG-bestand dat een cryptografische handtekening bevat
Bestandsnaam:RAID_FRMW_LX_R151923.BIN.sign
Bestandsgrootte:194 Bytes
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
De GnuPG-handtekening voor Red Hat Linux Update Package kan worden gebruikt voor het verifiëren van de identiteit van Dell met het overeenstemmende Red Hat Linux Update Package.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
82dad2f88c488382e9a84340d3678c9c
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Updatepakket voor Red Hat Linux
Bestandsnaam:RAID_FRMW_LX_R151923.BIN
Bestandsgrootte:10.99 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dell Update Packages voor Linux kunnen worden gebruikt als zelfstandige toepassingen die ervoor zorgen dat aan specifieke validatiecriteria wordt voldaan voordat updates worden toegepast. Opmerking: Update Packages voor Linux zijn open-source. Zie het Dell Update Packages voor Linux Leesmij-bestand voor meer informatief.
1. After installing this firmware and rebooting, a consistency check will automatically begin on RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is correct. The consistency check cannot be terminated and will resume at its last point following a reboot. This consistency check will appear as a Background Initialization but will only perform a consistency check with no data being modified. The consistency check runs in the background, allowing the virtual disks to remain accessible during the check. While this background check is designed to minimize performance impact, some degradation in performance may occur until the check is complete, especially under heavy I/O.
This program creates a bootable diskette to upgrade the firmware of the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is a self extracting executable. 2) Insert a blank diskette into the system's diskette drive. 3) Double click on the file that you downloaded and follow the instructions on the screen to extract the files to the diskette. 4) Insert the diskette into the system with the RAID controller for which you want to update the firmware and boot the system. 5) Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code level and prompt you to reconfirm before starting the firmware upgrade process.
To perform this process in non-interactive mode please execute, Pflash /? and read about possible command line switches.
6) Remove the diskette and reboot the system. Custom Instructions for perc4-FWP4352D-A22.txt:
Download the readme file to view information about this release. Instructions for RAID_FRMW_LX_R151923.BIN:
Download
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./RAID_FRMW_LX_R151923.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./RAID_FRMW_LX_R151923.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R151923.BIN.sign:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do once on your system.) 2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R151923.BIN.sign
Instructions for RAID_FRMW_WIN_R151923.EXE:
Download
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.