Opnieuw opstarten vereistAUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Chassis Management Controller (CMC) Firmware Version 3.03
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Fixes and Enhancements in version 3.03 over 3.02 -------------------------------------- - Fix for potential issue in CMC 3.00, 3.01 or 3.02 only. There is a potential for a power fault in redundant CMC configurations during a CMC switchover or failover.
NOTE: when upgrading to CMC 3.03 in a redundant CMC configuration, you must select to upgrade either both CMCs, or the standby CMC first. Do not upgrade the active CMC first.
NOTE: for Optimal Power management of high-end configurations, it is also recommended to upgrade iDRAC firmware to 3.02 for M610, M610x, M710, M710HD, and M910 blades.
Fixes and Enhancements in version 3.02 over 3.01 -------------------------------------- - Fix for racadm testfeature command - Fix for power-up failure on M610X after OS crash. BIOS halts system with error "Failed to allocate sufficient blade power".
* Link tuning updates for Dell 10GbE XAUI PTM, Dell M5424-n IOM, Qlogic FC8 mezzanine card and Brocade Superhawk2 switch
Dell Technologies raadt u sterk aan deze belangrijke update zo spoedig mogelijk uit te voeren. De update bevat essentiële bugfixes en wijzigingen om de functionaliteit, betrouwbaarheid en stabiliteit van uw Dell systeem te verbeteren. De update bevat mogelijk ook beveiligingsoplossingen en andere functieverbeteringen.
Bestandsindeling:Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:CMC3.03-A00.exe
Bestandsgrootte:30.77 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
NOTE: when upgrading to CMC 3.03 in a redundant CMC configuration, you must select to upgrade either both CMCs, or the standby CMC first. Do not upgrade the active CMC first.
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell Bios Release Notes window appears.
Instructions for CMC3.03-A00.exe
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract files.