Opnieuw opstarten vereistAUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
This firmware release is a maintenance release for the 28xx version of PowerConnect switches and includes enhancements and bug fixes.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Fixes and Enhancements:
Enhancements: - Added a mode button to transition to various confiruations depending on the switch, as follows: > The current running configuration is automatically saved to local storage. If the system is switched to unmanaged mode via the Managed Mode button, the system does not load the saved configuration, but it is still maintained in the device's local storage mode > On PC2816/PC2824/2848 - A transition from Unmanaged or Secure mode to Managed mode via the use of the Managed Mode button results in the switch resetting automatically and returning to Managed mode while running the saved configuration (if no configuration exists, then the default configuration is used). > Transition from Unmanaged to Manged mode behaves differently, i.e. after mode button is pressed, device is automatically configured with IP address 192.168.2.1 and username admin (no password). User must connect to the device and select, via Restore Configuration WEBUI page, if device should return to previously saved configuration or to default configuration or to configuration loaded via TFTP. Only after this selection will the device reboot to managed mode with the chosen configuration.
Fixes: - Device does not flood BPDU when connected to a port with a specific source MAC address pattern (xx:xx:xx:xx:xx:81).
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Bestandsindeling:Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:pc_28xx_10044.zip
Bestandsgrootte:7.15 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.