AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Management information bases (MIBs) are a collection of definitions, which define the properties of the managed object within the device to be managed. Every managed device keeps a database of values for each of the definitions written in the MIB. It is not the actual database itself - it is implementation dependant. Definition of the MIB conforms to the SMI given in RFC 1155. Internet MIB is given in RFC 1213 sometimes called the MIB-II
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
1. staPortProtocolMigration OBJECT-TYPE DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION "The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE DESCRIPTION "The operational value of the Edge Port parameter. The object is initialized to the value of staPortAdminEdgePort and is set FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE DESCRIPTION "The administrative point-to- point status of the LAN segment attached to this port. A value of forceTrue (0) indicates that this port should always be treated as if it is connected to a point-to- point link. A value of forceFalse(1)indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE DESCRIPTION "The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port.
This object is used to configure the spanning tree port path cost in 32 bits value range when the staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not instantiated."
7. staProtocolType OBJECT-TYPE DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE DESCRIPTION "Indicates the type of spanning tree path cost mode Configured on the switch. This mode applies to all instances of the Spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32 bit value. The set
Dell Technologies raadt aan om deze update te bekijken om te bepalen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op sommige configuraties, of bevat nieuwe functies die al dan niet op uw omgeving van toepassing zijn.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Hard Drive Installation (via WinZip) with Setup.exe File for R62192.EXE
Download
1.Click Download Now, to download the file. 2.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4.If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R62192.EXE. 2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\r62192. Write down this path so the executable (I.e. Setup.exe) file can be found later. 3.The Self-Extractor window appears. 4.Click OK. 5.After completing the file extraction, if the Self-Extractor window is still open, close it. 6.Click the Start button and then click Run. 7.Type C:\DELL\DRIVERS\r62192 in the Open textbox and then click OK. 8.Follow the on-screen installation instructions.
Hulp nodig bij problemen met de netwerkverbinding?
Zoek een oplossing in de Dell gids voor probleemoplossing en gebruik van het netwerk.