Maak kennis met Windows 2012

Bekijk nieuwe functies en ontdek hoe u het meest uit uw Windows-systeem haalt

Meer informatie

Details driver

Dell Server Deployment Pack Application 2.1

This package provides the Dell Server Deployment Pack Application and is supported on Enterprise Servers and Powervault models that are running the following Windows Operating Systems: Windwos Server 2008 and Windwos Server 2012.

Versie

Andere versies
2.0,A00 14 mei 201213:52:11

Geldt voor

Server Deployment Pack for Microsoft System Center Configuration Manager;

Datum

Releasedatum
29 mei 2013
Laatst bijgewerkt op
09 dec 2013

Belang

Optioneel. Optioneel: Dell raadt aan de gedetailleerde informatie over de update door te nemen, om vast te stellen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op bepaalde configuraties, of biedt nieuwe functies die al dan niet op uw omgeving van toepassing zijn.

Beschikbare bestandsindelingen

Bestandsindeling:Hard-Drive
Bestandsnaam:Dell_Server_Deployment_Pack_v2.1_for_Configuration_Manager_A00.exe
Downloadtype:HTTP
Bestandsgrootte: 82MB
Format-omschrijvingDeze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
Toegevoegd aan downloadlijst
Ga naar [{0}]
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
27d61121ce7bc5afc6d3ceef4351b33d
SHA1:
808c6bdaf6dd7b1ff0d815abe3869a4649c3c71d
SHA-256:
366874c8fdb3fa538bb43195fde4a560bd58863a206830559da51467257e5b51

Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell.


Belangrijke informatie

Important Notes
1. Dell Server Deployment Pack 2.1 includes DTK 4.2.0.1 in same package.
2. In iDRAC network settings, if the "Auto config Domain Name" is enabled for a target, then the task sequence "Static DNS Domain Name" used for configuring iDRAC will fail to set the configuration; however, the task sequence will not report any error, and the next task will continue to run.
3. To avoid this issue, before you run the task sequence, in iDRAC network settings, clear "Auto config Domain Name."
4. In the task sequence, it is recommended that you do not move or delete these Custom Action steps - "Restart in WinPE", "SetRebootStep", "Reboot to PXE/USB", Second "Format and Partition" step, "Setup windows and ConfigMgr," and "Reset RebootStep".
5. On a client machine, a task will fail if the Dell Remote Access Controller "Virtual Flash" is set to "enabled".
6. To prevent this failure, ensure that the "Virtual Flash" is set to "disabled" when a task is executed on the client machine.
7. After an operating system is deployed, ensure that the installed mass-storage driver is same as that specified in the Task Sequence.
8. If you find any differences, update the driver manually.
9. In Array Builder, you cannot delete the logical drive under Non-RAID disks.
10. In Configuration Manager 2007, when Dell specific packages, drivers, and boot images are managed using Configuration Manager's "Manage Distribution Point Wizard," the confirmation page displays incomplete summary.
11. In the Task Sequence Editor Window, to modify the path under "Logs/Return Files" page for the Dell custom actions, click "APPLY" and "OK."
12. When DSDP is being uninstalled on Windows Server 2008 operating system, a message displays that a reboot is required to complete the setup. Ignore this message and click "OK" to complete the uninstallation.
13. There is no new version of "ConfigMgr Client Package" for DSDP 2.1.

Probleemoplossingen en verbeteringen

Fixes
- Fixed the problems which were reported in earlier releases of DSDP and have been corrected in this release.
- Fixed Retain and Remove DTK screen when you keep the Configuration Manager console open while upgrading DSDP on the Configuration Manager Admin Console, Ignore the screen and click Next.

Enhancements
- Enhanced support for Microsoft System Center Configuration Manager (Configuration Manager) 2012 SP1
- Enhanced support for Windows 2012 Server deployment
- Enhanced support for New Dell Servers:
i. Dell PowerEdge M420
ii. Dell PowerEdge R520
iii. Dell PowerEdge R320
iv. Dell PowerEdge R420
v. Dell PowerEdge M520
vi. Dell PowerEdge T420
vii. Dell PowerEdge T320
viii. Dell PowerEdge M820
-Enhanced support for installing Dell Server Deployment Pack on a Configuration Manager where the SMS provider is installed on a system other than the site server system.

Installatie-instructies

Hard Drive Installation (File Extractions Only) Instructions

Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.

My Download List-#1 (0 )

Help en zelfstudies voor drivers

Mijn downloadlijsten

Met Mijn downloadlijsten kunt u lijsten met drivers maken en opslaan die u op een later tijdstip wilt installeren. Lijsten kunnen alleen worden opgeslagen door u aan te melden bij uw bestaande account, of door een nieuwe aan te maken en te klikken op "Deze lijst opslaan."
Meer informatie