AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
This package provides the Dell PERC 5/i Adapter Firmware Update and is supported on the Enterprise Servers and Powervault models that are running the following Operating System: NA.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Fixes - DeviceType on the Device Manager display has been corrected to show the proper device type: RAID - Disk Timeout has been increased from 60 seconds to 65 seconds to safely allow drives to complete recovery.
Enhancements - Added a bus rescan after a logical volume are initialized to effectively remove stale data. This will allow the OS to invalidate its cache data.
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dell Update Packages in Microsoft Windows 32-bits indeling zijn ontworpen om te worden uitgevoerd in Microsoft Windows 64-bits besturingssystemen. Dell Update Packages in Microsoft Windows 64-bits indeling kunnen alleen worden uitgevoerd in Microsoft Windows 64-bits besturingssystemen. Bij het selecteren van een stuurprogramma-update dient u het stuurprogramma te kiezen dat bij uw besturingssysteem past.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
b38627244896f9ec0c22b4c4255f9cba
SHA1:
ee612c6ba3e9917d2d58514f888ba4a713d968ec
SHA-256:
Niet beschikbaar
Bestandsindeling:Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam:BR189331.exe
Bestandsgrootte:1.54 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
De GnuPG-handtekening voor Red Hat Linux Update Package kan worden gebruikt voor het verifiëren van de identiteit van Dell met het overeenstemmende Red Hat Linux Update Package.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dell Update Packages voor Linux kunnen worden gebruikt als zelfstandige toepassingen die ervoor zorgen dat aan specifieke validatiecriteria wordt voldaan voordat updates worden toegepast. Opmerking: Update Packages voor Linux zijn open-source. Zie het Dell Update Packages voor Linux Leesmij-bestand voor meer informatief.
1. All RAID volumes will be presented as write through (WT) to the operating system (Windows and linux) independent of the actual write cache policy of the virtual disk.The controller manages the data in cache independently of the OS and any applications.Please use OpenManage or the BIOS Configuration Utility to view and manage virtual disk cache settings.
2. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification.
3. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
4. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
5. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
6. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
7. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1.OpenManage 5.2 or greater is recommended.
8. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
9. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
10. Foreign dedicated hot spares are now imported as global hot spares.
11. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
12. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.Dell recommends the user to take a data backup before starting these operations.
13. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
2.0 Performing the Firmware Upgrade ===================================
Web pack: ---------
Download 1. Click Download Now, to download the file. 2. When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears. 3. From the "Save As" field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation 1. Get 2 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click the 'Continue' button on the self-extractor window after inserting one of the formatted floppies. 4. The utility prompts the user to insert the second floppy diskette after it completes writing on the first floppy. 5. Remove the first floppy and insert the second floppy diskette. 6. Press 'Continue' button. 7. After all the files have been copied to the last floppy disk, press the 'Finish' button to close the Self-Extracter window
Install 1. Insert the first (or the only) disk of the set into the Floppy drive. 2. Click Start, click Shutdown, click Restart, and then click OK. 3. Follow the on-screen instructions.
Zip pack: ---------
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 4. After flash is complete, remove bootable media. 5. Reboot system for changes to take effect.
Windows Update Package: -----------------------
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the "Install" button. 5. Follow the remaining prompts to perform the update.
Linux Update Package: ---------------------
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the "./FRMW_LX_RXXXXXX.BIN --version" command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN: ----------------------------------------------------------------------------
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.