Opnieuw opstarten vereistAUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
This firmware release is a maintenance release for the M8024 and M8024S version of PowerConnect switches and includes only bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
This is a maintenance release so only bug fixes are included.
Fixes: - The "show fiber optical-transceiver" command shows LOS even though link is up. - Unable to ping with jumbo frames set. - cpCaptivePortalWebLangCode.1.1 displays en when mib says only supported value active (1). - LLDP Assignment of port ID for Port-Description TLV - The CLI shows incorrect media type 10GBASE-T for fiber ports - Can't assign a name to a VLAN. - No default route or static showing in ip route table. - CLI command "show dot1x users" is missing - Missing port membership from SNMP (dot1qVlanStaticUntaggedPorts and dot1qVlanStaticEgressPorts) - The VRPP track port priority changes in the running config. - Firmware won't allow domain names with hyphen "-" in logging email. - Internal ports are up during most of the switch POST. - Continuous log message at default settings. - DNS client error. - VRRP Intermittent Connectivity Issues. - VLAN membership port names not consistent in GUI. - Sometimes switch crashes when receiving of Radius packets. - In a Stack, the "show system temperature" CLI command breaks CLI - QOS on port channel. - Dropped VLAN frames are included in Discards counters. - PC7048 Combo ports are not passing traffic. - Order of switchport commands in running-config changed.
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Bestandsindeling:Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:PCM8024v4.2.1.3a25.zip
Bestandsgrootte:19.96 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
NOTE: Please follow software update instructions included in the zip file. "Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf" "Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.
NOTE: Please follow software update instructions included in the zip file. "Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf" "Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.
Hulp nodig bij problemen met de netwerkverbinding?
Zoek een oplossing in de Dell gids voor probleemoplossing en gebruik van het netwerk.