Dell TL2000/4000, v.9t30, A12

AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Firmware update for the TL2000/TL4000 Tape Library and drives that fix an issue where the RMU would become inaccessible.
Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006

FW Revisions:
Library FW = 9T30
Drive FW:
LT03 FH drives = 93G6
LT03 HH drives = 93G7
LT04 FH drives = A232
LT04 HH drives = A233
LTO5 drives = A422
Aanbevolen

Vind de beste download voor uw systeem

Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.

Support zoeken

Voer uw Dell servicetag of model in

Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie

Deze driver is niet compatibel

Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.

Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.

Probleemoplossingen en verbeteringen

Fixed an issue where the RMU would become inaccessible.
Meer lezen

Versie

9t30, A12

Releasedatum

07 aug. 2012

Downloadtype

Firmware

Categorie

Tapeautomatisering

Belang

Dringend
Dell Technologies raadt u sterk aan deze belangrijke update zo spoedig mogelijk uit te voeren. De update bevat essentiële bugfixes en wijzigingen om de functionaliteit, betrouwbaarheid en stabiliteit van uw Dell systeem te verbeteren. De update bevat mogelijk ook beveiligingsoplossingen en andere functieverbeteringen.
Beschikbare bestandsindelingen Belangrijke informatie weergeven:

Bestandsindeling: Externe ZipPack
Bestandsnaam: R282043.exe
Bestandsgrootte: 73.05 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
486c8689ce6fc4b1497ff7830dd7182a
SHA1:
86a1b98ea513214cc7aeaf2cc678f4bc46453a2f
SHA-256:
f8f05e78c8cca1ecded853e4885f0e6f6d05022293de1ae840ce017263637c7f

Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)

Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.

***** LINUX INSTALLATIONS ONLY *****

The default install location for the current release of ITDT has changed in Linux based installations.

The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre

The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:

IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
KIT,ACC,EN,ACTVN,TL2K,SLVR
KIT,ACC,EN,ACTVN,TL4K,SLVR
TL2000/4000
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.

Help en zelfstudies voor drivers