AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Firmware update for HLDS GSA-T40N 12.7 tray IDE DVD+/-RW
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Bestandsindeling:Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:GSA-T40N_FW A101_090123.zip
Bestandsgrootte:2.34 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
1.Click Download Now, to download the file. 2.When the File Download window appears, click Save this program to disk and click OK. The Save In: window appears. 3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4.If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install (Windows XP and Vista Users)
1.Double-click the new icon on the desktop labeled GSA-T40N_FW A101_090123.zip 2.The Self-Extracting window appears and prompts you to extract to C:\DELL\DRIVERS\GSA-T40N_FW A101_090123 3.Click OK. 4.After completing the file extraction, if the Self-Extractor window is still open, close it. 5.The Windows Flash utility, DriveUpdater, for the HLDS GSA-T40N drive will automatically launch. 6.If a "Can't find the target drive" message pops up, then the system is not detecting the HLDS GSA-T40N drive. Check to make sure the HLDS GSA-T40N drive is properly installed. 7.Click on the "UPDATE" button to start the update process. 8.Wait for the flash process to complete. 9.A reboot is advisable at this point. Pls save all data and restart the system.
Install (DOS Users)
1.Double-click the new icon on the desktop labeled GSA-T40N_FW A101_090123.zip. 2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\GSA-T40N_FW A101_090123. Write down this path so the executable (i.e. Setup.exe) file can be found later. 3.The Self-Extractor window appears. 4.Click OK. 5.After completing the file extraction, if the Self-Extractor window is still open, close it. 6.The Windows Flash utility, DriveUpdater, for the HLDS GSA-T40N drive will automatically launch. Close the DriveUpdater. On other OSes, the DriveUpdater utility may fail to launch. 3.After completing the file extraction, navigate to the location of the extracted files. 8.Copy the all five files in the DOS directory to a bootable DOS floppy or flash disk. 9.Boot to DOS 10.Navigate to the location where "dosA101.BAT" is located on the DOS floppy or Flash disk. 11.Enter "dosA101.BAT" at the DOS prompt. 12.Follow the instructions to complete the flash process and reboot after flash process is complete.