AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS ST31000340AS
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
Dell Technologies raadt u sterk aan deze belangrijke update zo spoedig mogelijk uit te voeren. De update bevat essentiële bugfixes en wijzigingen om de functionaliteit, betrouwbaarheid en stabiliteit van uw Dell systeem te verbeteren. De update bevat mogelijk ook beveiligingsoplossingen en andere functieverbeteringen.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
ead5c107eded39e0fab3cc5b65c1d89f
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam:BR213714.exe
Bestandsgrootte:1.03 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data. 2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again. 3. Choose "Continue" in the next window to create a bootable floppy. 4. Close all applications and restart system. 5. Press F12 and insert the floppy disk containing the firmware update. 6. Select boot from Floppy. 7. The Seagate Firmware Update will start automatically. 8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 9. Once completed, a message indicating process completion will appear. 10. Remove the floppy diskette and power off your system. 11. Power on your system to continue normal operation. Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO". 5. Restart your system. 6. Press F12 and insert the CD containing the firmware update. 7. Select boot from CD/DVD. 8. The Seagate utility will start automatically. 9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 10. Once completed, a message indicating process completion will appear. 11. Remove the CD and power off your PC. 12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. The files are located in "C:\DELL\Drivers\R213714\Files" directory. 5. Add the files to your bootable USB key. 6. Restart your system. 7. Insert your USB key containing the firmware update. 8. Press F12 and choose boot from USB 9. The Seagate utility will start automatically. 10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 11. Once completed, a message indicating process completion will appear. 12. Remove the Bootable Media and power off your system.