AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
This package provides the Seagate ST9160412AS/ST9250410AS/ST9320423AS/ST9500420AS Firmware Update and is supported on Inspiron, Studio XPS Laptop, Studio Laptop and Optiplex models that are running the following Windows Operating Systems: XP, Vista and Windows 7.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Fixes - Fixed clicking noise Enhancements - Not Applicable
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Custom Instructions for R250679.EXE: * PLEASE PRINT THE FOLLOWING INSTRUCTIONS * For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file ""C:\DELL\Drivers\R250679\Seagate Utility.ISO"" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.)(PLEASE MAKE SUREA/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. The files are located in ""C:\DELL\Drivers\R250679\Files"" directory. 4. Add the files to your bootable media and run the ""FLASH.bat"". 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the Bootable Media and power off your system.