Western Digital WD2500AALX/WD3200AALX/WD5000AALX/WD10EALX 3.5 7200 RPM SATA3.0 Firmware Update

AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
This package provides the Western Digital WD2500AALX 250GB/WD3200AALX 320GB/WD5000AALX 500GB/WD10EALX 1TB 3.5 7200 RPM SATA3.0 Firmware Update and is supported on Vostro Desktop, XPS Desktop, Inspiron Desktop, Precision, Alienware Desktop and Optiplex models that are running the following Operating Systems: XP, Vista, Windows 7, Linux and Ubuntu.
Aanbevolen

Vind de beste download voor uw systeem

Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.

Support zoeken

Voer uw Dell servicetag of model in

Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie

Deze driver is niet compatibel

Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.

Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.

Probleemoplossingen en verbeteringen

Initial Release.
Meer lezen

Versie

19.01H19, A00

Releasedatum

07 sep. 2011

Downloadtype

Hardware

Categorie

Opslag

Belang

Aanbevolen
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Beschikbare bestandsindelingen

Bestandsindeling: Externe ZipPack
Bestandsnaam: R313263.exe
Bestandsgrootte: 1.35 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar

Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)

Red Hat® Linux 9.0
Ubuntu® Desktop 7.04
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista (64-bits)
Windows XP
Windows XP Embedded
Windows XP, 64-bit
Hard Drive Installation (via WinZip) of DOS Utility for R313263.exe Download 1.Click the location, e.g. Americas, from which you want to download the file. 2.When the File Download window appears, click Save this program to disk and click OK. The Save In window appears. 3.From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop. 4.If a Download Complete window appears, click Close. A new icon appears on your desktop. Install 1. Double-click the new icon on the desktop labelled R313263.exe. 2. The Self-Extractor window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R313263.If you did not print these instructions, write down this path. The WinZip Self-Extractor window appears. 3. Click OK. 4. If the Self-Extractor window is still open, close it. 5. Create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 – "What can I use for a boot disk with CD-ROM support?"6. Insert the floppy disk into the floppy drive and reboot the computer. 7. At the A:/> prompt, type C: and then press the [ENTER] key. 8. Type C:\DELL\DRIVERS\R313263 and then press [ENTER]. 9. Follow the on-screen instructions. Installation 1. Extract .zip file to a known path. 2. Copy "WD.bat" and "WD4082.exe" to root directory of a bootable USB key. 3. Boot from USB key and ensure drive path includes WD.bat and WD4082.exe. 4. Type "WD" and hit "Enter". 5. Firmware update will provide messaging indicating successful update. Note: Update checks current firmware version and will not run on identical version.

Help en zelfstudies voor drivers