Dell MD3000 SAS RAID Controller, v.07.35.39.64, A11
AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
#######################################################################
Dell PowerVault MD3000 Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Default_MD3000_N133X-735890-005.dlp :
Default NVSRAM for MD3000 used in most typical configurations
Single_Port_Clustering_MD3000_N133X-735890-705.dlp :
Single Port MS Cluster NVSRAM for MD3000 that has a single
host port per controller used in clustering configuration
MD3000_FW_RC_07353964_133x.dlp : RAID Controller Firmware
MD1000_A04.bin : MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.31.60
-----------
- New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3,
RHEL 4.8, RHEL 5.4.
- Modular Disk Storage Manager enhancements.
Additionally, the following issues have been fixed:
- Excessive Destination Driver Errors with no component listed on
2nd gen firmware
- BBU Learn Cycle fails in Simplex mode
- Learn Cycle failing as “incomplete?
- NX1950 Solution losing connectivity to every device on the network
- Hitachi SATA HDD firmware failing to update
- ESX host with CHAP enabled causes reboot loop when updating to
2nd gen firmware.
- MPP Virtual HBA Driver issue with Oracle ASM
- 2nd gen firmware upgrade utility does not display double byte
characters properly
Please refer to the Dell PowerVault MD3000 RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000 are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000 array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000 system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
================
Dell PowerVault MD3000 Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Default_MD3000_N133X-735890-005.dlp :
Default NVSRAM for MD3000 used in most typical configurations
Single_Port_Clustering_MD3000_N133X-735890-705.dlp :
Single Port MS Cluster NVSRAM for MD3000 that has a single
host port per controller used in clustering configuration
MD3000_FW_RC_07353964_133x.dlp : RAID Controller Firmware
MD1000_A04.bin : MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.31.60
-----------
- New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3,
RHEL 4.8, RHEL 5.4.
- Modular Disk Storage Manager enhancements.
Additionally, the following issues have been fixed:
- Excessive Destination Driver Errors with no component listed on
2nd gen firmware
- BBU Learn Cycle fails in Simplex mode
- Learn Cycle failing as “incomplete?
- NX1950 Solution losing connectivity to every device on the network
- Hitachi SATA HDD firmware failing to update
- ESX host with CHAP enabled causes reboot loop when updating to
2nd gen firmware.
- MPP Virtual HBA Driver issue with Oracle ASM
- 2nd gen firmware upgrade utility does not display double byte
characters properly
Please refer to the Dell PowerVault MD3000 RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000 are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000 array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000 system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
================
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op. Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Meer lezen-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Versie
07.35.39.64, A11
Releasedatum
26 sep. 2011
Downloadtype
Firmware
Categorie
SAS RAID
Belang
AanbevolenDell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Beschikbare bestandsindelingen
Bestandsindeling: Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam: MD3000-CFW-NVSRAM_07353964_A11_R315163.zip
Bestandsgrootte: 13.43 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
969f9d98e061cc286f09dace67e10d4b
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)
Ondersteunde besturingssystemen
Niet van toepassing
Geldt voor
ASSY,ENCL,CTL,DHST
ASSY,ENCL,CTL,SGHST
Installatie-instructies
Custom Instructions for MD3000-CFW-NVSRAM_07353964_A11_R315163.zip:
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Help en zelfstudies voor drivers
Ga voor meer downloads naar Drivers en downloads. Voor hulp bij het gebruik van de informatie op deze pagina, gaat u naar Hulp en zelfstudies voor drivers.