Dell PowerVault 224F/660F SES Firmware, v. 1.9.5, A01
AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
SES 1.9.5 Test Release Notes
The SES195.bin file is the required file for the download. It is highly recommended that all I/O is stopped before beginning this procedure.
You must update the SES firmware on each LS module in the PowerVault 660 and each of the attached enclosures. This includes the 660F as well as all attached 224F enclosures.
If you are replacing an LS module, or adding new PowerVault 224 units to an existing subsystem, you should update all LS modules with this firmware.
Enclosure services must be online to update the firmware. If enclosure services are offline then restore them to the online state before performing the following procedure.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Improvements to SES 1.9.5 SES 1.9.5 enhances the communication between SES modules. In the past there were times when thresholds set on the master SES were not copied to the slave SES. In a failover scenario the slave would apply the old values, requiring that the user reset the new thresholds.
SES 1.9.5 enhances reporting so that when an LS module fails, Dell Open Manage Array Manager can report the problem. The LED for the LS module will, as in previous versions, still light when an LS module is in a failed state.
SES 1.9.5 now reports the correct model name of the system, either PV660 or PV224.
In SES 1.3b2, upper warning/critical for LS Module temperature sensors is 45C/55C and for power supply sensors is 55C/65C, which is incorrect. The correct settings are in SES 1.9.5 and are 35C/45C for the LS module temperature sensors and 45C/55C for the power supply.
Dell Technologies raadt aan om deze update te bekijken om te bepalen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op sommige configuraties, of bevat nieuwe functies die al dan niet op uw omgeving van toepassing zijn.
Bestandsindeling:Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:SES_195.exe
Bestandsgrootte:115.92 KB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
To update the LS module SES firmware, perform the following steps:
1. Start Array Manager on the host system by clicking Start-- Programs-- Dell OpenManage Applications-- Array Manager-- Array Manager Console.
2. Update the SES firmware on the PowerVault 660F.
a. Click Arrays-- PV660F SubSystem-- Physical Array.
b. Right-click the controller for the subsystem you wish to upgrade and choose Download-- SES Firmware.
c. Select all the enclosure check boxes and click Next.
d. Click Browse and locate the SES195.bin file. Click Next.
e. Click Finish and OK.
NOTE: This process takes about 8 to 9 minutes for each additional LS module in the storage array. If the firmware update does not complete successfully, repeat the process until it does. This issue is not a hardware problem, but a software-timing issue.
f. After download completes, right-click the PV660F subsystem in Array Manager and choose Rescan to update the properties information.
g. Right-click the enclosure in Array Manager, choose Properties, and verify that it is using SES firmware version 1.9.5. If it is not, repeat the download procedure.
h. Physically remove the primary LS module to cause failover.
i. Right-click the PV660F subsystem in Array Manager and choose Rescan to update the properties information.
j. Right-click the enclosure and choose Properties to verify its firmware level is also at version 1.9.5. If it is not, repeat the download procedure.
k. Replace the LS module that you removed. If you have multiple enclosures, you must verify the firmware level on every LS module in the subsystem, one at a time.