Schakel uw computer niet uit en koppel de stroomtoevoer niet los tijdens het bijwerken van het BIOS. Dit kan uw computer beschadigen. Tijdens de update wordt uw computer opnieuw opgestart en ziet u mogelijk voor korte tijd een zwart scherm.
Lees voordat u bijwerkt de installatie-instructies en de belangrijke informatie die hieronder is vermeld.
Dell OptiPlex System BIOS, A11
AUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
Optiplex GX150 A11 System BIOS
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
The following changes have been made to BIOS rev A10 to create A11:
Dell Technologies raadt aan om deze update te bekijken om te bepalen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op sommige configuraties, of bevat nieuwe functies die al dan niet op uw omgeving van toepassing zijn.
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam:BR89211.exe
Bestandsgrootte:521.1 KB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:Flash BIOS-uitvoerbaar bestand
Bestandsnaam:GX150A11.exe
Bestandsgrootte:334.69 KB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een uitvoerbaar BIOS-bestand. Om uw systeem bij te werken downloadt u het bestand en slaat u dit op uw desktop of harde schijf op. Voer daarna het uitvoerbare bestand uit. Om de BIOS bij te werken, moet uw systeem op netstroom zijn aangesloten en dient het batterijniveau ten minste 10% te bedragen.
Non-Packaged Creating the disk: NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Insert the blank bootable formatted 3.5-inch floppy disk. 7. Right-click the copy of the file, point to “Send To”, click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS: NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS. 1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power. 2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive. 3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”. The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears. 4. Press the “Enter” key. A Press Y to replace old BIOS with new BIOS prompt appears. 5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears. 6. Remove the floppy disk and press the “Enter” key. 7. The computer will now restart with the new revision of the BIOS installed. The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore the system defaults. For more information, refer to Dell Knowledge Base Articles: · FA1035264 Title "How do I restore setup defaults on my Dell OptiPlex system?" FA1035227 Title "How do I clear NVRAM on my Dell OptiPlex system?"
Floppy Disk Boot to Disk for BR89211.exe
Download
1. Click Download Now, to download the file. 2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to the flopp
Hulp nodig bij BIOS-problemen?
Zoek een oplossing in de Dell gids voor probleemoplossing en gebruik van het BIOS.