Dell PERC 5/i Adapter, v.5.2.2-0072, A06
AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dell Precision PERC 5/I Adapter Firmware release
Package Version: 5.2.2-0072
Package Version: 5.2.2-0072
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op. Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
Package Version - 5.2.2-0072
Firmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
Meer lezenFirmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
Versie
5.2.2-0072, A06
Releasedatum
22 okt. 2008
Downloadtype
Firmware
Categorie
SAS RAID
Belang
AanbevolenDell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Beschikbare bestandsindelingen Belangrijke informatie weergeven:
Bestandsindeling: Externe ZipPack
Bestandsnaam: DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Bestandsgrootte: 1.35 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling: Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam: BR189433.exe
Bestandsgrootte: 1.53 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
22859dbfb5e2165ffd23fe9188c404ac
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling: Externe releaseaantekeningen
Bestandsnaam: R189433.txt
Bestandsgrootte: 13.54 KB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bevat onbewerkte tekst die kan worden bekeken met een standaard teksteditor.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
6db0e46508e97ee65ea117a7f85cd0d1
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)
Belangrijke informatie
1. When viewing SATA physical disk properties from Ctrl-R or other management
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
Ondersteunde besturingssystemen
Niet van toepassing
Installatie-instructies
Instructions for BR189433.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Help en zelfstudies voor drivers
Ga voor meer downloads naar Drivers en downloads. Voor hulp bij het gebruik van de informatie op deze pagina, gaat u naar Hulp en zelfstudies voor drivers.