Opnieuw opstarten vereistAUTOMATISCH GEÏNSTALLEERDDit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.
The Intel SATA Solid-State Drive firmware update tool provides the latest firmware for the following Intel Solid-State Drives in all capacities: Intel X25-M X18-M SATA Solid-State Drive on 50nm (black case) Intel X25-E SATA Solid-State Drive on 50nm (black case) Intel X25-M X18-M SATA Solid-State Drive on 34nm (silver case) Intel X25-V Value SATA Solid-State Drive on 34nm Intel Solid-State Drive 320 Series
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.
Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in.Meer informatie
Geen resultaten gevonden. We hebben geen resultaten gevonden voor uw zoekopdracht. Wijzig uw zoekopdracht en probeer het opnieuw.
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Dell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Bestandsindeling:Een of meer zelfextraherende schijfimages opgeslagen in een zelfextraherend zip-bestand
Bestandsnaam:INTEL_S320_FW0362.exe
Bestandsgrootte:1.64 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het uit om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
1. Load the .ISO image onto a blank CD (CD-R or CD-RW) using CD-ROM burning software of your choice. 2. Ensure the Intel SSD is attached to a SATA port in the system. For best results, ensure the SATA port is a native control port of your south bridge controller (generally SATA ports 0 through 4). SATA ports attached to a third-party SATA controller bridge chip or add-in SATA controller expansion cards are not recommended for use when updating the firmware. For more details, consult your system technical documentation. 3. Insert the Intel SATA SSD Firmware Update CD into the system. 4. Ensure the CD-ROM drive is enabled as a bootable device in BIOS and the CD-ROM boot priority is ahead of the drive containing the OS boot partition. For more details, consult your system documentation. 5. Complete a safe system shutdown and power off completely, count to 10 (seconds), and then reboot the system. A restart or warm reset (CTRL-ALT-DEL) is not adequate. 6. Power on your system to start the update process. - The tool will prompt you through the update process for all the SSDs that qualify for the firmware update in your system. - To verify that the firmware update is complete, power down per step 5 above with the CD still installed and let the firmware update software scan for SSDs in your system again. The scan should now display your SSD and the firmware should now show the new firmware number for your specific SSD. - Once the firmware has been verified, remove the CD and power down the system again. - If you changed SATA port mode from AHCI to "Compatibility" or or "Legacy" mode for the firmware update, ensure you change the port back to AHCI mode for best performance. Note: For computers booting into Windows 7 after a firmware update, a message appears when the operating system starts that prompts you to restart the computer. Restart when prompted. If you have questions about any of these steps, please contact Intel Customer Support for further assistance at the following website: http://www.intel.com/go/ssdsupport/
4. INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.