Broadcom Trusted Platform Module Driver
Omstart kreves AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package provides the Broadcom Trusted Platform Module Driver and is supported on Precision M70/M20 and Latitude D410/D610/D810/X1 that are running the following Windows Operating Systems: Windows 2000 and XP.
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Fixes
- Not Applicable.
Enhancements
- Enhanced support for the following languages: Traditional Chinese Korean Brazilian Portuguese.
Les mer- Not Applicable.
Enhancements
- Enhanced support for the following languages: Traditional Chinese Korean Brazilian Portuguese.
Versjon
1.71.0020.0, A03
Utgivelsesdato
10 feb. 2014
Nedlastingstype
Driver
Kategori
Brikkesett
Viktighet
ValgfrittDell Technologies anbefaler at du går gjennom denne oppdateringen for å finne ut om den gjelder for systemet ditt. Oppdateringen inneholder endringer som bare påvirker bestemte konfigurasjoner, eller som gir nye funksjoner som kanskje gjelder miljøet ditt.
Tilgjengelige formater
Filformat: Ekstern ZIP-pakke
Filnavn: R99394.EXE
Filstørrelse: 26.6 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
Ikke tilgjengelig
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Operativsystemer som støttes
Windows 2000
Windows XP
Instruksjoner for installasjon
Hard Drive Installation (via WinZip) with Setup.exe File for R99394.EXE
Download
1. Click Download File, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Navigate to your desktop and double-click on the icon labeled R99394.EXE
2. Click Continue. The Destination Folder Window appears.
3. Click the OK button.
4. If prompted to create the folder, click the Yes button. A progress meter moves as extraction is completed.
5. Click the OK button.
Turn on the TPM
NOTE: If this is the first time the TPM has ever been used on this computer, you must perform steps 5 through 9 below. If the TPM on this system has been used before, you may now skip directly to step 10. Steps 5 through 9 must be executed once, and only once, on any given system.
1. Reboot the computer and enter the system SETUP program by pressing F2 during the Power On Self Test.
2. In the Setup program, open the "Security" settings category and select the "TPM Security" menu option.
3. Set the TPM Security state to "On".
4. Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save/Exit" option in order to keep the changes.
5. Boot into the Windows operating system
6. Launch the Broadcom Secure Foundation (TM) Platform Initialization wizard by double-clicking on its icon in the system tray on the lower right hand corner of the screen.
7. The Platform Initialization Wizard will execute a function called "Vendor Activation." This operation only occurs once on any given system.
8. Follow the instructions in the dialog boxto execute the Vendor Activation step.
9. The system will now reboot automatically.
10. Reboot the computer and enter the system SETUP program again by pressing F2 during the Power On Self Test.
11. In the Setup program, open the "Security" settings category and select the "TPM Activation" menu option.
12. Set the TPM Activation state to "Activate".
13. Changes to this field take effect immediately.
14. At this point, the TPM is now ready to be put into service. When the operating system reboots, launch the Broadcom Secure Foundation (TM) Platform Initialization by double-clicking on its icon in the system tray on the lower right hand corner of the screen. This wizard will walk you through the procedure of establishing the TPM Owner and User passwords and credentials. For more information, please consult the "Broadcom Secure Foundation (TM) Getting Started Guide" located in the menu.
Reboot will be required
Download
1. Click Download File, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Navigate to your desktop and double-click on the icon labeled R99394.EXE
2. Click Continue. The Destination Folder Window appears.
3. Click the OK button.
4. If prompted to create the folder, click the Yes button. A progress meter moves as extraction is completed.
5. Click the OK button.
Turn on the TPM
NOTE: If this is the first time the TPM has ever been used on this computer, you must perform steps 5 through 9 below. If the TPM on this system has been used before, you may now skip directly to step 10. Steps 5 through 9 must be executed once, and only once, on any given system.
1. Reboot the computer and enter the system SETUP program by pressing F2 during the Power On Self Test.
2. In the Setup program, open the "Security" settings category and select the "TPM Security" menu option.
3. Set the TPM Security state to "On".
4. Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save/Exit" option in order to keep the changes.
5. Boot into the Windows operating system
6. Launch the Broadcom Secure Foundation (TM) Platform Initialization wizard by double-clicking on its icon in the system tray on the lower right hand corner of the screen.
7. The Platform Initialization Wizard will execute a function called "Vendor Activation." This operation only occurs once on any given system.
8. Follow the instructions in the dialog boxto execute the Vendor Activation step.
9. The system will now reboot automatically.
10. Reboot the computer and enter the system SETUP program again by pressing F2 during the Power On Self Test.
11. In the Setup program, open the "Security" settings category and select the "TPM Activation" menu option.
12. Set the TPM Activation state to "Activate".
13. Changes to this field take effect immediately.
14. At this point, the TPM is now ready to be put into service. When the operating system reboots, launch the Broadcom Secure Foundation (TM) Platform Initialization by double-clicking on its icon in the system tray on the lower right hand corner of the screen. This wizard will walk you through the procedure of establishing the TPM Owner and User passwords and credentials. For more information, please consult the "Broadcom Secure Foundation (TM) Getting Started Guide" located in the menu.
Reboot will be required
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring