Dell PowerVault 220S/221S SES Firmware, v.E.19, A10

AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.
Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
The PV22xS_E19.bin file is the downloadable version of the enclosure firmware that provides management functions for the PowerVault 220S/221S. These functions include SCSI Enclosure Services (SES) and SCSI Accessed Fault-Tolerant Enclosures (SAF-TE) reporting to the host initiator, control of all enclosure LED indicators, and monitoring of all the enclosure's environmental elements.
Anbefalt

Finn den beste nedlastingen for systemet

Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemet

Støtte for søk

Skriv inn Dell-service-ID-en eller -modellen

Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan

Denne driveren er ikke kompatibel

Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.

Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.

Feilrettinger og forbedringer

Fixes:
fixes a rare issue with the handling of SCSI bus parity error responses by the EMM. This may result in a SCSI bus reset and cause a pause of several seconds (depending on configuration) in I/O processing. The I/O operation will automatically retry and recover. There is no associated risk of data loss, security, long term reliability or other performance issues.

Enhancements:
N/A
Les mer

Versjon

E.19, A10

Utgivelsesdato

02 okt. 2013

Nedlastingstype

Fastvare

Kategori

DAS

Viktighet

Anbefalt
Dell Technologies anbefaler at du installerer denne oppdateringen ved neste planlagte oppdatering. Oppdateringen inneholder endringer for å opprettholde den generelle systemtilstanden. Det sikrer at systemprogramvaren forblir oppdatert og kompatibel med andre systemmoduler (fastvare, BIOS, drivere og programvare) og kan inkludere andre nye funksjoner.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: FRMW_WIN_R124186.EXE
Filstørrelse: 2.91 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
B8D077EB628DB0EEF07B0423F517F0AA
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: FRMW_LX_R124186.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
E8D1CC56FDA72AEB35B819083804ABA6
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Pakker ut filer direkte til lokal disk
Filnavn: fupg_e19-R124186.exe
Filstørrelse: 38.56 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet er et arkiv med filer som kan pakkes ut til en mappe på harddisken. Deretter installerer du fra den mappen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
47bd02d936053c433365c52416ec55f5
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: ISO-image for CD-ROM
Filnavn: R124186.iso
Filstørrelse: 28.92 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et ISO-image som brukes til å opprette en CD-ROM. Last ned filen til en mappe på harddisken, og bruk deretter et CD-brenningsprogram til å lage en CD.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
104a59fc100dcb4cfba0eca362c712c0
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: FRMW_LX_R124186.BIN
Filstørrelse: 5.46 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
DE3ECFA1B77FEFE1F640D291D304C033
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig

Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)

Mer informasjon

Vis alle | Skjul alle
Known Limitations:



  1. In Joined bus/Clustering mode, firmware is downloaded to both EMMs automatically (assuming that the second EMM is installed) by failing over and then failing back. In Split bus mode, however, updating firmware on one EMM does not automatically update the other EMM. Therefore, in order to update both EMMs, the user must download directly through the cable to each EMM.


    NOTE: It is strictly prohibited to have an Active/Active cluster while doing firmware downloads to avoid issues with the cluster.


  2. When using Array Manager 3.1.1 (or less) in Clustering mode, EMM firmware can only be upgraded on the primary EMM (the left one when viewing the enclosure from the back). Therefore, in order to update both EMMs, the user must download firmware to each EMM individually.


  3. If the PV22XS is configured with one EMM and one termination module in Joined bus mode, an error message will pop up when upgrading the firmware through Array Manager 3.1.1 (or less). This is an invalid error message in this scenario. If the fans have gone back to normal speed, then the firmware download was successful. To verify this, stop and restart the Disk Management Service. Then you can view the firmware version under the enclosure properties.


  4. Firmware updates to enclosures attached to PERC 2/DC, PERC3/SC/QC/DC/DCL, or any PERC4 array controllers require that Array Manager be at release 3.4 or greater; while PERC 2/QC or PERC 3/Di controllers require that Array Manager be at least 3.5 or greater.


  5. Important Linux Requirements:
    "libstdc++-libc6.2-2.so.3" is required for running this application. If this library is not found on the system,the following error will appear.


    ./getSystemId: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory Collecting inventory...
    ./PV2XXA00: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot openshared object file: No such file or directory


    In order to install the missing files, you would need to install "compat-libstdc++-[Y.Y]-2.96.[XXX].i386.rpm" package from Red Hat distribution CD, where "XXX" is the version number of package and "Y.Y" is the release. Install the package as described below.


    E.g. on RH9.0 distribution do following:


    (Note: for RH9.0 the package to be installed is located on disc 1)


    # cd /mnt/cdrom/RedHat/RPMS
    # rpm -ihv compat-libstdc++-7.3-2.96.118.i386.rpm(e.g. on RH 9.0 distribution)





�
Instructions for fupg_e19-R124186.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.

Instructions for R124186.iso:
NOTE: In order to use this file, you need a CD-R or CD-RW and appropriate software to create a CD from the downloaded image

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
2. Follow the Installation Instructions to make a bootable CD. Place the CD in your system that is connected to your PV22xS system and boot directly from the CD. Follow the on-screen instructions to update your PV22xS firmware.
3. If you do not have a CD drive on your system and need to boot from a memory USB key, you will need to create a bootable USB key using a system that has a CD drive. Boot the CD on the system with the CD drive and select the on-screen menu option to create a bootable USB key. When completed, take the USB key to the system attached to the PV22xS and boot from the USB key. Follow the on-screen instructions to update your PV22xS firmware.

Dell Update Package Instructions for FRMW_WIN_R124186.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.

Dell Update Package Instructions for FRMW_LX_R124186.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the "./FRMW_LX_R124186.BIN version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R124186.BIN" from the shell.
5. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R124186.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R124186.BIN.sign

Hjelp og veiledninger for drivere