LiteOn 1100W (PN: 9PG9X) Firmware Package
Omstart kreves AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package provides the new firmware for power supplier and is supported on LiteOn 1100W (PN: 9PG9X) running on the Windows and Linux operating systems.
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Fixes
- Fixes non-redundant power supply intermittent resets.
Enhancement
- Not Applicable
Les mer- Fixes non-redundant power supply intermittent resets.
Enhancement
- Not Applicable
Versjon
01.01.05, A05
Utgivelsesdato
06 des. 2011
Nedlastingstype
Fastvare
Kategori
Strøm
Viktighet
ViktigDell Technologies anbefaler på det sterkeste at du installerer denne oppdateringen så snart som mulig. Oppdateringen inneholder viktige feilrettinger og endringer for å forbedre funksjonaliteten, påliteligheten og stabiliteten til Dell-systemet ditt. Den kan også inkludere sikkerhetsreparasjoner og andre funksjonsforbedringer.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: PSU_FRMW_WIN_R259051.EXE
Filstørrelse: 3.66 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
8683AC691347DA734477537917560B36
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: PSU_FRMW_LX_R259051.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
CC48C717282A0E50FC6B8B93E11F7EB8
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: PSU_FRMW_LX_R259051.BIN
Filstørrelse: 2.19 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
7C9CF770B4BB73FC6FEF11A6C8251C14
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
�
1100W (9PG9X) PSU
Instruksjoner for installasjon
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring