Ikke slå av datamaskinen eller koble fra strømkilden ved oppdatering av BIOS, da dette kan skade datamaskinen. Under oppdateringen starter datamaskinen på nytt, og en kort stund vil du se at skjermen er svart.
Før du oppdaterer, kan du lese installasjonsinstruksjonene og viktig informasjon som er angitt nedenfor.
Dell Server BIOS PowerEdge M820 Version 1.3.6
Omstart kreves AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
PowerEdge M820 BIOS Version 1.3.6
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
* Updated Authenticated Code Module (ACM)
* Updated memory reference code
* Updated processor reference code
* Updated chipset reference code to improve PCIe x16 slot performance
* Updated Intel Xeon processor E5-2600 product family microcode for C1 stepping to 00000619
* Updated Intel Xeon processor E5-2600 product family microcode for C2 stepping to 0000070D
* Added Windows 2012 support
* Increased the speed of the System Setup launch process
* Enhanced the iDRAC virtual mouse performance in pre-boot GUIs such as System Setup and Lifecycle Controller
* Enabled display of CPLD version information in BIOS setup
* Added UEFI boot support for Ubuntu
* Added support to allow PCI Memory Mapped I/O allocation above 4 GB
* Improved handling of storage devices without a native UEFI driver
* Updated DIMM types used in power budget calculation to include LRDIMMs
* Changed default option for the Memory Operating Mode for all Memory Configurations to "Optimizer"
* Increased system memory speeds for Memory Configurations with all slots in a channel populated and when the System Profile in BIOS setup is set to "Performance" mode or Memory Frequency in the "Custom" mode is set to Memory Maximum Performance
* Increased system memory speeds for 1600 MT/s DDR3L RDIMMS when one or two slots in a channel are populated.
* Enabled entering System Setup (F2 hotkey) on a boot where a one-time Service Partition Boot has been requested
* Added new power management option "Collaborative CPU Performance Control" in the System Profile settings.
* Added new power limiting option "Logical Processor Idling" in the Processor Settings
* Corrected an issue where HPET resources are not reported to OS
Les mer* Updated memory reference code
* Updated processor reference code
* Updated chipset reference code to improve PCIe x16 slot performance
* Updated Intel Xeon processor E5-2600 product family microcode for C1 stepping to 00000619
* Updated Intel Xeon processor E5-2600 product family microcode for C2 stepping to 0000070D
* Added Windows 2012 support
* Increased the speed of the System Setup launch process
* Enhanced the iDRAC virtual mouse performance in pre-boot GUIs such as System Setup and Lifecycle Controller
* Enabled display of CPLD version information in BIOS setup
* Added UEFI boot support for Ubuntu
* Added support to allow PCI Memory Mapped I/O allocation above 4 GB
* Improved handling of storage devices without a native UEFI driver
* Updated DIMM types used in power budget calculation to include LRDIMMs
* Changed default option for the Memory Operating Mode for all Memory Configurations to "Optimizer"
* Increased system memory speeds for Memory Configurations with all slots in a channel populated and when the System Profile in BIOS setup is set to "Performance" mode or Memory Frequency in the "Custom" mode is set to Memory Maximum Performance
* Increased system memory speeds for 1600 MT/s DDR3L RDIMMS when one or two slots in a channel are populated.
* Enabled entering System Setup (F2 hotkey) on a boot where a one-time Service Partition Boot has been requested
* Added new power management option "Collaborative CPU Performance Control" in the System Profile settings.
* Added new power limiting option "Logical Processor Idling" in the Processor Settings
* Corrected an issue where HPET resources are not reported to OS
Versjon
1.3.6, 1.3.6
Utgivelsesdato
08 okt. 2012
Nedlastingstype
System-BIOS
Kategori
BIOS
Viktighet
AnbefaltDell Technologies anbefaler at du installerer denne oppdateringen ved neste planlagte oppdatering. Oppdateringen inneholder endringer for å opprettholde den generelle systemtilstanden. Det sikrer at systemprogramvaren forblir oppdatert og kompatibel med andre systemmoduler (fastvare, BIOS, drivere og programvare) og kan inkludere andre nye funksjoner.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: M820_BIOS_7GPXY_WN32_1.3.6.EXE
Filstørrelse: 7.9 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
cc579d17eb6d9ce231df8f8729cac006
SHA1:
8fc8beb245c26386e84aba58013b6e5a9b76b7d5
SHA-256:
15664113a0e90ca9cfcbf5535b837e4081cf01896930633ebcc6449e6dbe1b93
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: M820_BIOS_7GPXY_LN32_1.3.6.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
a5b0ef386b2345bfcdb5c8167fada6a7
SHA1:
90c15c79625bbe2270e1c1f8ba4abb7de3f4cb75
SHA-256:
72bb1074ed99f5d9743f2a7f8e141103e9dc96034f54bdc8a1f857465e0e5951
Filformat: En selvutpakkende fil for bruk på 64-biters maskiner
Filnavn: M820-010306C.efi
Filstørrelse: 8.08 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder komprimert innhold som kan kjøres fra EFI Shell eller EFI Boot Manager. Last ned filen til EFI-partisjonen på en flyttbart medielagringsenhet. Sett inn det flyttbare mediet, start systemet på nytt, og kjør deretter programmet fra EFI Shell eller EFI Boot Manager.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
e6b0d52f7ac451eefeeb4b68fe79a9dd
SHA1:
483cd523f25cdf2f68a550d9f4206ade93dfe632
SHA-256:
54ccb91a1fe1c2a54112a3fb88f8b2161e4ddcbaceeb954b5723d38822d1f2e4
Filformat: Flash BIOS-kjørbar
Filnavn: M820-010306C.exe
Filstørrelse: 2.94 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformat består av en BIOS-kjørbar fil. Hvis du vil oppdatere systemet, laster du ned filen og lagrer den på skrivebordet eller harddisken, og deretter kjører du den kjørbare filen. Hvis du vil oppdatere BIOS, må systemet ha tilkoblet vekselstrøm og batterioppladingsnivå på minst 10 %.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
d3481fd2b5a48d3a8e769aec8595d0ea
SHA1:
af0eba192f0c981a6835d23e4766cd8e3c348480
SHA-256:
4b36e2576e569daad4ba856f4c237c361ec557a7259b68ef24dd0f6bfd337b45
Filformat: Eksterne versjonsmerknader
Filnavn: M820-010306CBIOS.txt
Filstørrelse: 6.3 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet inneholder ren tekst som kan vises med en vanlig tekstredigeringsprogram.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
82d2a8298a3e35914dd4236c2dea4602
SHA1:
4b22dd595c1098471b009a32daf24706ceea72d6
SHA-256:
9511731e0fde6df1eb2d61b06732417ec16abf056dba5ac3749a7b62fa9c250b
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: M820_BIOS_7GPXY_LN32_1.3.6.BIN
Filstørrelse: 6.24 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
bb25774fb40f2f2e762c5dd74fdd6f39
SHA1:
a7084e9f61cd2eae92b8862a06611ce5f957f9ab
SHA-256:
34d2e3e9f0175e1bcb2e4c4589b80ef3c54f15091175eb6e0ff104ccca226b7c
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
None
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
Server BIOS 12G
Instruksjoner for installasjon
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Trenger du hjelp med BIOS-problemer?
Finn en løsning i Dells feilsøkings- og bruksveiledning for BIOS.Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring