Emerson 1100W PSU Firmware Update
Omstart kreves AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package provides the Emerson 1100W PSU Firmware Update and is supported on Precision and Enterprise Servers running on the Windows and Linux operating systems.
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Fixes
- Eliminated communication error issue
- Eliminated unexpected high speed fan increase.
Enhancements
- Enhanced fan control to improve system startup cooling
Les mer- Eliminated communication error issue
- Eliminated unexpected high speed fan increase.
Enhancements
- Enhanced fan control to improve system startup cooling
Versjon
M1.01.0A, A01
Utgivelsesdato
17 mai 2012
Nedlastingstype
Fastvare
Kategori
Strøm
Viktighet
ViktigDell Technologies anbefaler på det sterkeste at du installerer denne oppdateringen så snart som mulig. Oppdateringen inneholder viktige feilrettinger og endringer for å forbedre funksjonaliteten, påliteligheten og stabiliteten til Dell-systemet ditt. Den kan også inkludere sikkerhetsreparasjoner og andre funksjonsforbedringer.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE
Filstørrelse: 4.35 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
f8212e02aca8dadce60d661adaa580d1
SHA1:
c97010f2f8e3ca325780e50f94556f62bdaaca91
SHA-256:
b064aea48c212c054c3e086b9b6e6820da090db92c229d78ed10a9fd924a99de
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
af647786bcceca9a5775d1bc768d51e5
SHA1:
ec37fd1489e4507c78a78f81995f29261e72b777
SHA-256:
08f7d01be2f422cba783936eccd2b5ddc7901676cb329b200953b6b8bf9dc46a
Filformat: Eksterne versjonsmerknader
Filnavn: N3WRV external instructions.txt
Filstørrelse: 3.54 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet inneholder ren tekst som kan vises med en vanlig tekstredigeringsprogram.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
686525135cc6fc075bdd98ff3968ef80
SHA1:
ee40f33eb7ab748f93ac0ee702d62d567c30a95d
SHA-256:
Ikke tilgjengelig
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN
Filstørrelse: 2.15 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
844d36f36e61252a0a843003fc124e6c
SHA1:
cb658bf0afd8c65ccdfebb655443fbc52f2e6ee6
SHA-256:
6aabf9901144859d26d37108c8d86c06fd9e3ced4c6cf2f85d9b9d2594f97604
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
1100W (1Y45R) PSU
Instruksjoner for installasjon
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file, Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for Power_Firmware_N3WRV_WN32_M1.01.0A_A01.EXE:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign:
Download
1. Click the "Download File" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file, Power_Firmware_N3WRV_LN32_M1.01.0A_A01.BIN.sign
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring