Ikke slå av datamaskinen eller koble fra strømkilden ved oppdatering av BIOS, da dette kan skade datamaskinen. Under oppdateringen starter datamaskinen på nytt, og en kort stund vil du se at skjermen er svart.

Før du oppdaterer, kan du lese installasjonsinstruksjonene og viktig informasjon som er angitt nedenfor.

Dell OptiPlex System BIOS, A10

AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.
Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
Optiplex GX1 / NX1 / GX1p A10 FlashBIOS
Anbefalt

Finn den beste nedlastingen for systemet

Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemet

Støtte for søk

Skriv inn Dell-service-ID-en eller -modellen

Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan

Denne driveren er ikke kompatibel

Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.

Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.

Feilrettinger og forbedringer

The following changes have been made to BIOS revision A09 to create A10.

1. New NIC.ROM to fix booting across Cisco routers. Version .99n.02
2. Updated the copyright to 2001.
Les mer

Versjon

A10, A10

Utgivelsesdato

10 sep. 2001

Nedlastingstype

System-BIOS

Kategori

BIOS

Viktighet

Valgfritt
Dell Technologies anbefaler at du går gjennom denne oppdateringen for å finne ut om den gjelder for systemet ditt. Oppdateringen inneholder endringer som bare påvirker bestemte konfigurasjoner, eller som gir nye funksjoner som kanskje gjelder miljøet ditt.
Tilgjengelige formater

Filformat: Ett eller flere selvutpakkende diskimager inne i en selvutpakkende ZIP-fil
Filnavn: BGX1_A10.exe
Filstørrelse: 366 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
Ikke tilgjengelig
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig

Filformat: Flash BIOS-kjørbar
Filnavn: Gx1_a10.exe
Filstørrelse: 209.96 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformat består av en BIOS-kjørbar fil. Hvis du vil oppdatere systemet, laster du ned filen og lagrer den på skrivebordet eller harddisken, og deretter kjører du den kjørbare filen. Hvis du vil oppdatere BIOS, må systemet ha tilkoblet vekselstrøm og batterioppladingsnivå på minst 10 %.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
Ikke tilgjengelig
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig

Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)

Mer informasjon

Vis alle | Skjul alle
OPTIPLEX 330 SYSTEM BIOS
OptiPlex System BIOS
Floppy
Creating the disk:
NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk;
label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Find the downloaded file on your Desktop, if it looks like a
floppy disk, double-click it and skip to Step 7.

NOTE: If the Security Warning window appears, click “Yes”.


7. Click “Setup”.
A DOS Window appears.
8. Press the “Enter” key.
9. Insert the floppy disk into the floppy disk drive and press
the “Enter” key.
10. Press the “Y” key to begin copying files.
An End of the disk set prompt appears.
11. Press the “Enter” key.
12. Click the “Start” button, click “Run”, and then type a: in the
Open box. Click “OK’.
The list of files on the floppy disk appears.
13. If there is a readme file in the list, double-click it for
additional instructions.
14. Close all open windows and leave the disk in the floppy drive.
Skip to the section Flashing the BIOS below

NOTE: If you are creating this disk on another computer, remove the disk.
Then insert it into the system that needs the BIOS flashed, and resume the
procedure.

Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk; label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.

Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.

NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS
version A10 on the OptiPlex™ series system.

A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.

NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.

When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.

If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore t

Trenger du hjelp med BIOS-problemer?

Finn en løsning i Dells feilsøkings- og bruksveiledning for BIOS.

Hjelp og veiledninger for drivere