Dell PowerConnect 5224, v.PowerConnect 5224 MIB, A01
AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
Management information bases (MIBs) are a collection of definitions, which
define the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each of the
definitions written in the MIB. It is not the actual database itself - it
is implementation dependant. Definition of the MIB conforms to the SMI
given in RFC 1155. Internet MIB is given in RFC 1213 sometimes
called the MIB-II
define the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each of the
definitions written in the MIB. It is not the actual database itself - it
is implementation dependant. Definition of the MIB conforms to the SMI
given in RFC 1155. Internet MIB is given in RFC 1213 sometimes
called the MIB-II
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
1. staPortProtocolMigration OBJECT-TYPE
DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP
BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION
"The administrative value of the Edge
Port parameter. A value of TRUE(1)
indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE
DESCRIPTION
"The operational value of the Edge Port
parameter. The object
is initialized to the value of
staPortAdminEdgePort and is set
FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE
DESCRIPTION "The administrative point-to-
point status of the LAN segment
attached to this port. A value of forceTrue
(0) indicates that this port should always be
treated as if it is connected to a point-to-
point link. A value of forceFalse(1)indicates
that this port should be treated as having a
shared media connection. A value of auto(2)
indicates that this port is considered to
have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the
MAC entity is configured for full duplex operation, either
Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in 32 bits value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
7. staProtocolType OBJECT-TYPE
DESCRIPTION "The version of Spanning Tree Protocol the bridge is
currently running. The value 'stp(1)' indicates the
Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE
DESCRIPTION "Indicates the type of spanning tree path cost mode
Configured on the switch. This mode applies to all
instances of the Spanning tree protocol running on
the switch. When the value of this MIB object is
changed, the path cost of all ports will be
reassigned to the default path cost values
based on the new spanning tree path cost mode and
the ports' speed. When the value of this MIB object
is set to long(2), the staPortLongPathCost MIB
object must be used to retrieve/configure
the spanning tree port path cost as a 32 bit value.
The set
Les merDESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP
BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION
"The administrative value of the Edge
Port parameter. A value of TRUE(1)
indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE
DESCRIPTION
"The operational value of the Edge Port
parameter. The object
is initialized to the value of
staPortAdminEdgePort and is set
FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE
DESCRIPTION "The administrative point-to-
point status of the LAN segment
attached to this port. A value of forceTrue
(0) indicates that this port should always be
treated as if it is connected to a point-to-
point link. A value of forceFalse(1)indicates
that this port should be treated as having a
shared media connection. A value of auto(2)
indicates that this port is considered to
have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the
MAC entity is configured for full duplex operation, either
Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in 32 bits value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
7. staProtocolType OBJECT-TYPE
DESCRIPTION "The version of Spanning Tree Protocol the bridge is
currently running. The value 'stp(1)' indicates the
Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE
DESCRIPTION "Indicates the type of spanning tree path cost mode
Configured on the switch. This mode applies to all
instances of the Spanning tree protocol running on
the switch. When the value of this MIB object is
changed, the path cost of all ports will be
reassigned to the default path cost values
based on the new spanning tree path cost mode and
the ports' speed. When the value of this MIB object
is set to long(2), the staPortLongPathCost MIB
object must be used to retrieve/configure
the spanning tree port path cost as a 32 bit value.
The set
Versjon
PowerConnect 5224 MIB, A01
Utgivelsesdato
27 mai 2003
Nedlastingstype
Driver
Kategori
Nettverk
Viktighet
ValgfrittDell Technologies anbefaler at du går gjennom denne oppdateringen for å finne ut om den gjelder for systemet ditt. Oppdateringen inneholder endringer som bare påvirker bestemte konfigurasjoner, eller som gir nye funksjoner som kanskje gjelder miljøet ditt.
Tilgjengelige formater
Filformat: Ekstern ZIP-pakke
Filnavn: R59398.EXE
Filstørrelse: 126.16 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
Ikke tilgjengelig
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Operativsystemer som støttes
Ikke tilgjengelig
Instruksjoner for installasjon
Custom Instructions for R59398.EXE:
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to upzip the files. 4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation
1. Click the Start button and then click Run.
2. Type C:\DELL\DRIVERS\R59398 in the Open textbox and then click OK.
3. Follow the on-screen installation instructions.
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to upzip the files. 4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation
1. Click the Start button and then click Run.
2. Type C:\DELL\DRIVERS\R59398 in the Open textbox and then click OK.
3. Follow the on-screen installation instructions.
Trenger du hjelp med problemer med nettverkstilkoblingen?
Finn en løsning i Dells feilsøkings- og bruksveiledning for nettverk.Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring