Seagate Barracuda ST3500620AS 500GB LF S2 HDD Firmware Update
Omstart kreves AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package provides the Windows based Seagate Barracuda ST3500620AS 500GB LF S2 HDD Firmware Update and is supported on the Precision T3500/T5500/390/T7500, Vostro Desktop 200 and OptiPlex 960 that are running the following Windows Operating Systems: XP and Vista.
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Fixes
- Not Applicable
Enhancements
- Enhanced performance and reliability
Les mer- Not Applicable
Enhancements
- Enhanced performance and reliability
Versjon
DE13, A01
Utgivelsesdato
06 mar. 2012
Nedlastingstype
Maskinvare
Kategori
Lagring
Viktighet
KritiskDell Technologies anbefaler på det sterkeste at du installerer denne oppdateringen så snart som mulig. Oppdateringen inneholder viktige feilrettinger og endringer for å forbedre funksjonaliteten, påliteligheten og stabiliteten til Dell-systemet ditt. Den kan også inkludere sikkerhetsreparasjoner og andre funksjonsforbedringer.
Tilgjengelige formater Se viktig informasjon:
Filformat: Ekstern ZIP-pakke
Filnavn: R213715.exe
Filstørrelse: 2.32 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
6f138e7ee081fa3c710514b43bd25ae4
SHA1:
20132b72c39084d3f35381e3f1bbd0ffb90942e4
SHA-256:
Ikke tilgjengelig
Filformat: Ett eller flere selvutpakkende diskimager inne i en selvutpakkende ZIP-fil
Filnavn: BR213715.exe
Filstørrelse: 1.03 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
4a410001b9b0c9b12dffb0620e5b4251
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
1. Please do not interrupt the firmware update sequence.
Operativsystemer som støttes
Windows Vista, 32-bit
MS Windows Vista 64-biters
Windows XP
Windows XP, 64-bit
Gjelder
ST3500620AS 500GB LF S2 HDD
Instruksjoner for installasjon
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\TMCVP". (Where 'TMCVP' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\TMCVP" (where 'TMCVP' isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data.
2. Click on the (BR213715.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3500620AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.
For Bootable CD option
1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213715\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3500620AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213715\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3500620AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Double-click the new icon on the desktop.
2. The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\TMCVP". (Where 'TMCVP' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\TMCVP" (where 'TMCVP' isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data.
2. Click on the (BR213715.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3500620AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.
For Bootable CD option
1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213715\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3500620AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data.
2. Click on the (R213715.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213715\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3500620AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring