Dell PERC 5/i Adapter, v.5.2.1-0066, A07
AUTOMATISK INSTALLERT Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
Dell PowerEdge RAID Controller 5/i Adapter Firmware release
Package Version: 5.2.1-0066
Package Version: 5.2.1-0066
Anbefalt
Finn den beste nedlastingen for systemet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetStøtte for søk
Skriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Package Version - 5.2.1-0066
Firmware Version - 1.03.40-0316
SASBIOS Version - MT28-8
Ctrl-R Version - 1.04-019A
MPT - 00.10.47.00-IT
Please see release notes for detailed list of fixes/enhancements.
Les merFirmware Version - 1.03.40-0316
SASBIOS Version - MT28-8
Ctrl-R Version - 1.04-019A
MPT - 00.10.47.00-IT
Please see release notes for detailed list of fixes/enhancements.
Versjon
5.2.1-0066, A07
Utgivelsesdato
23 nov. 2007
Nedlastingstype
Fastvare
Kategori
SAS RAID
Viktighet
AnbefaltDell Technologies anbefaler at du installerer denne oppdateringen ved neste planlagte oppdatering. Oppdateringen inneholder endringer for å opprettholde den generelle systemtilstanden. Det sikrer at systemprogramvaren forblir oppdatert og kompatibel med andre systemmoduler (fastvare, BIOS, drivere og programvare) og kan inkludere andre nye funksjoner.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: FRMW_WIN_R168188.EXE
Filstørrelse: 2.64 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
634DE3F2A247564C60EE09BC54AEF784
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Ett eller flere selvutpakkende diskimager inne i en selvutpakkende ZIP-fil
Filnavn: BR168188.exe
Filstørrelse: 1.53 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
1fa75ad3ae293b6f7376774f0a8605e4
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: FRMW_LX_R168188.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
A6D1FC4AE5C3D9C1C430FC8721456D18
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Ekstern ZIP-pakke
Filnavn: R168188.EXE
Filstørrelse: 1.34 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Denne filen inneholder et komprimert (zippet) sett med filer. Last ned filen til en mappe på harddisken, og åpne den (dobbeltklikk) for å pakke ut settet med filer. Følg instruksjonene for å fullføre installeringen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
Ikke tilgjengelig
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Eksterne versjonsmerknader
Filnavn: R168188.txt
Filstørrelse: 14.26 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet inneholder ren tekst som kan vises med en vanlig tekstredigeringsprogram.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
f5140c1d0a6f32ed11f517ca030590be
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: FRMW_LX_R168188.BIN
Filstørrelse: 2.26 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
4F2888CC1070FB64DC87F45EC6E56048
SHA1:
Ikke tilgjengelig
SHA-256:
Ikke tilgjengelig
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
1. When viewing SATA physical disk properties from Ctrl-R or other management
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
�
Instruksjoner for installasjon
Custom Instructions for BR168188.exe:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
Dell Update Package Instructions for FRMW_LX_R168188.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./FRMW_LX_R168188.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R168188.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168188.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168188.BIN.sign
Dell Update Package Instructions for FRMW_WIN_R168188.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R168188.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for R168188.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
Dell Update Package Instructions for FRMW_LX_R168188.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./FRMW_LX_R168188.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R168188.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168188.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168188.BIN.sign
Dell Update Package Instructions for FRMW_WIN_R168188.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R168188.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for R168188.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring