Dell,FW,TL2000-4000,A16-B.20

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
TL2000 and TL4000 library and drive firmware and ITDT-DCR.
Library Firmware = B.20
LTO5 Drive Firmware = BBNF
LTO4HHv2 Drive Firmware = BBNF
LTO4FH Drive Firmware = BBH4
LTO4HHv1 Drive Firmware = BBH5
LTO3HHv2 Drive Firmware = BBNF
LTO3FH Drive Firmware = 93GP
LTO3HHv1 Drive Firmware =93GQ
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

Library improvements include:
- Fix for SNMP info for community names longer than 13 characters
- Proper library\drive response for a read failure on encrypted media

Several drive improvements and enhancements:
Several drive fixes which include:
- Stuck tape prevention
- I/O error recovery
- Error Reporting
Más información

Versión

B.20, A16

Fecha de publicación

10 abr. 2012

Tipo de descarga

Firmware

Categoría

Automatización de cintas

Importancia

Críticos
Dell Technologies recomienda encarecidamente aplicar esta importante actualización tan pronto como sea posible. La actualización contiene correcciones de errores críticas y cambios para mejorar la funcionalidad, la confiabilidad y la estabilidad del sistema Dell. También puede incluir correcciones de seguridad y otras mejoras de funciones.
Formatos disponibles Ver información importante

Formato de archivo: ZipPack externo
File Name: 7MX39_ZPE.exe
Tamaño del archivo: 100.69 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
275e5663d369086cd8237090747a865e
SHA1:
24d7745bd2a5ab1aed3dff8b6b1834910b9ed850
SHA-256:
e76be8b4bd9b2744921018e6a260d1674584762a0da2aa712353266950130464

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.

***** LINUX INSTALLATIONS ONLY *****

The default install location for the current release of ITDT has changed in Linux based installations.

The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre

The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:

IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Linux
Red Hat® Enterprise Linux 4.5
No corresponde
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Red Hat® Enterprise Linux 5.1
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows 2000
Windows Server 2008 R2
Windows Server 2003 x64
TL2000/4000
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.

Ayuda y tutoriales para controladores