Intel Matrix Storage Manager: computadora de escritorio, versión 8.9.0.1023, A00

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Intel Matrix Storage Manager Vista/Win7 64bit Driver (for pre-installation using the F6 method only)
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

Initial Release
Más información

Versión

8.9.0.1023, A00

Fecha de publicación

08 set. 2009

Tipo de descarga

Controlador

Categoría

Almacenamiento

Importancia

Recomendado
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles Ver información importante

Formato de archivo: ZipPack externo
File Name: R230360.exe
Tamaño del archivo: 352.79 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows Vista you can use a floppy, CD/DVD or USB.

3. For Windows XP or later operating systems:

- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

- When prompted, select 'S' to Specify Additional Device.

- Continue to step 5.

4. For Windows Vista:

- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.

- Continue to step 5.

5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
Custom Instructions for R230360.exe:

1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows Vista you can use a floppy, CD/DVD or USB.

3. For Windows XP or later operating systems:

- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

- When prompted, select 'S' to Specify Additional Device.

- Continue to step 5.

4. For Windows Vista:

- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.

- Continue to step 5.

5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.

Ayuda y tutoriales para controladores