Podczas aktualizowania systemu BIOS nie wyłączaj komputera ani nie odłączaj go od zasilania, ponieważ może to spowodować awarię. W trakcie aktualizacji komputer zostanie ponownie uruchomiony i na chwilę może pojawić się czarny ekran.

Przed aktualizacją należy zapoznać się z instrukcją instalacji i ważnymi informacjami podanymi poniżej.

Dell Latitude E6230 System BIOS A08

Wymagany restart ZAINSTALOWANO AUTOMATYCZNIE Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.
Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
Dell Latitude E6230 System BIOS A08
Polecane

Znajdź najlepsze pliki do pobrania dla swojego systemu

Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowych

Wyszukaj w zasobach wsparcia

Wprowadź kod Service Tag lub model produktu firmy Dell

Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu. Pokaż jak

Ten sterownik jest niezgodny

Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.

Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.

Poprawki i usprawnienia

1. Enhanced DDPE functionality.
2. Enhanced DDPA functionality.
3. Enhanced brightness control functionality.
4. Enhanced diagnostic support.
Więcej informacji

Wersja

A08, A08

Data wydania:

07 sty 2013

Rodzaj pobierania

System BIOS

Kategoria

BIOS

Priorytet

Zalecane
Firma Dell Technologies zaleca zastosowanie tej aktualizacji w następnym zaplanowanym cyklu aktualizacji. Aktualizacja obejmuje zmiany dotyczące utrzymywania ogólnego stanu systemu na odpowiednim poziomie. Zapewnia ona aktualność i zgodność oprogramowania systemowego z innymi modułami systemowymi (oprogramowaniem wewnętrznym, systemem BIOS, sterownikami i oprogramowaniem) oraz może zawierać inne nowe funkcje.
Dostępne formaty Wyświetl ważne informacje

Format pliku: Plik wykonywalny CPG BIOS przeznaczony do systemów Windows/DOS
Nazwa pliku: E6230A08.exe
Rozmiar pliku: 8.22 MB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten format pliku zawiera plik wykonywalny z systemem BIOS. Format uniwersalny (Windows/MS DOS) pozwala na przeprowadzenie instalacji z dowolnego systemu Windows lub środowiska MS DOS.
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5:
f737ee48a60d8aab2f7c0e450655fd70
SHA1:
035b67f3d7d1d01ccf9f84dfaeacaf184c02172d
SHA-256:
691aafa10326942cb02fe0f8ac5d80270480ccdedbf37285cd7d0c4d9bf7b195

Pobierając plik, akceptujesz warunki umowy licencyjnej na oprogramowanie firmy Dell. (w języku angielskim)

Dodatkowe szczegóły

Pokaż wszystkie | Ukryj wszystkie
Dell Fast Boot BIOS Feature:
The Dell Win8 Released BIOS adds a new feature called Fast Boot. When upgrading from a Pre-Win8 Released BIOS to a Win8 Released BIOS this feature will be set in Thorough mode. Setting this feature in Minimal will cause USB devices/ports to be disabled in the pre-OS environment. If you are dependent on USB devices in the pre-OS environment this setting should remain in the Thorough mode setting.

Upgrading and Downgrading between Currently Released BIOS Images (Pre-Win8 Released BIOS) and Win8 Feature Enhanced BIOS Images (Win8 Released BIOS)

Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.

Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.

Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.)
Dell Latitude E6230
Installation Instructions for the Universal (Windows/ DOS) format

1. Download file to Desktop

2. Use one of the methods below to flash the Bios.

Run the BIOS update utility from Windows environment

Run the BIOS update utility from DOS environment (Non-Windows users)


--------------------------------------------------------------------------------
Download file to Desktop

The file E6230A08.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.


1. Click Download now.The File Download window appears.

2. Click the Save button.The Save As window appears.

3. Select Desktop using the drop-down menu to the right of Save in.

4. Click the Save button.A progress meter moves as the download is completed.

5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.

--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment


1. Double click the Icon on your desktop labeled E6230A08.exe.The Dell BIOS Flash window appears

2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.

3. Click the OK button.The system will restart and the BIOS Flash will be completed.


Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.

1. Copy the file E6230A08.exe to a bootable USB key.

2. Boot from the USB key to the DOS prompt.

3. Run the file by typing Y:\E6230A08.exe (where y is the drive letter where the executable is located).

--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.

Potrzebujesz pomocy dotyczącej problemów z systemem BIOS?

Znajdź rozwiązanie w instrukcji obsługi i przewodniku firmy Dell dotyczącym rozwiązywania problemów z systemem BIOS.

Pomoc i poradniki dotyczące sterowników