ZAINSTALOWANO AUTOMATYCZNIEPlik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.
Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.
LSI Logic PCI SCSI/FC MPI Driver for Windows 2003 v1.9.11.0
Polecane
Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowych
Wyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu.Pokaż jak
Nie znaleziono wyników. Nie udało się znaleźć wyszukiwanych informacji. Zmodyfikuj wyszukiwanie i spróbuj ponownie.
Ten sterownik jest niezgodny
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Zaloguj się do systemu Windows jako administrator, aby korzystać z funkcji automatycznego skanowania. Jeśli już zalogowano się jako administrator i ten komunikat jest widoczny, uruchom ponownie komputer.System jest zarządzany przez administratora IT, a jego funkcje mogą być ograniczone.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Firma Dell Technologies zaleca zastosowanie tej aktualizacji w następnym zaplanowanym cyklu aktualizacji. Aktualizacja obejmuje zmiany dotyczące utrzymywania ogólnego stanu systemu na odpowiednim poziomie. Zapewnia ona aktualność i zgodność oprogramowania systemowego z innymi modułami systemowymi (oprogramowaniem wewnętrznym, systemem BIOS, sterownikami i oprogramowaniem) oraz może zawierać inne nowe funkcje.
Format pliku:Rozpakowuje pliki bezpośrednio na dysk lokalny
Nazwa pliku:MD2K3A00.exe
Rozmiar pliku:65 KB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten format pliku zawiera archiwum plików, które można zdekompresować do katalogu na dysku twardym. Z tego katalogu można następnie przeprowadzić instalację.
This driver is compatible with LSI 1020/1030 SCSI controllers and is intended for use with Windows 2003 Server, Enterprise Edition Server, Web Server, Small Business Server and Datacenter Server.
Since the 1020/1030 BIOS/FW is delivered as part of the System BIOS, it is highly recommended that you have the latest available System BIOS (also available from Dell support) already installed on your system before updating this driver
Download 1. Click Download Now, to download the file. 2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3. When the File Download window appears, click Save and click OK. The Save In: window appears. 4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Diskette Creation 1. Insert a floppy diskette into the floppy drive. 2. Double-click the new icon on the desktop. The Self-Extractor window appears. 3. Specify the floppy drive as the location to unzip the files. 4. Click on the unzip button to extract files.
IMPORTANT NOTE: If you are running Open Manage Array Manager v3.2 or higher under Windows 2003, to avoid a potential Blue Screen, prior to updating the driver you will need to: 1. Disable the SCSI subsystem provider in the Array Manager Utilities before upgrading the driver. Please refer to the Array Manager documentation for details on how to do this. 2. Once the SCSI provider is disabled, you should then navigate to the \WINDOWS\SYSTEM32\DRIVERS folder and temporarily rename ASPI32.SYS to ASPI32.XXX, then reboot the system before proceeding with the upgrade. 3. Following the upgrade, you will need to reboot again before re-naming ASPI32.SYS back to its' original name, then finally re-enabling the SCSI provider.
Updating the driver on an Existing Windows 2003 Server
*NOTE: You must be logged on as Administrator or have administrative privileges to perform these steps: 1. Copy files extracted above to formatted floppy disk 2. From the desktop, right-click the My Computer icon. 3. Left-click Manage. 4. Click Device Manager. 5. Double-click SCSI and RAID controllers (A List of all currently installed SCSI controllers appears) - in the case of a dual channel controller, there will be two devices listed (one for each channel).The driver will have to be updated separately for each channel. 6. Double-click the appropriate SCSI controller (such as 'LSI Logic 1020/1030 Ultra320 SCSI Adapter'). 7. Select the Driver tab. 8. Select Update Driver. (The Hardware Update Wizard appears). 9. Choose 'Install from a list of specific locations" and click Next. 10. Choose 'Don't Search. I will choose the driver to install" 11. Click Next. 12. Click 'Have Disk' button. (The 'Install from Disk' dialog appears). 13. Insert the driver diskette created above. (Skip this step if installing driver from location on hard drive) 14. Click 'Browse' button (Locate File dialog appears). 15. Use pull-down box to find floppy drive or location on hard drive where you previously extracted files. 16. Once the correct path appears in the dropdown box, 'symmpi.inf' should appear in 'File Name' box - if not, select it. 17. Click 'Open' button ('Install From Disk' dialog reappears with correct path displayed). 18. Click 'OK' (Upgrade Device Driver Wizard reappears). 19. Choose 'LSI Logic 1020/1030 Ultra320 SCSI Adapter' 20. Click 'Next' 21. Click 'Next' again to confirm choice and upgrade driver 22. Close Wizard by clicking Finish 23. Close Properties Dialog for device. 24. Do not reboot system yet if prompted to do so. 25. Repeat steps 5-23 for second channel after Device Manager refreshes. 26. Reboot System to complete upgrade.
Adding the LSI Logic SCSI Driver to an Existing Windows 2003 Server (non-upgrade) - *NOTE* this will only apply if the SCSI controller was previously disabled in system BIOS setup, and you have enabled it for the first time - otherwise, follow the update instructions above: 1) Boot the system to Windows 2003. The 'Found New Hardware' Wizard displays. 2) Select 'Search for a suitable driver' and select 'Next' to continue. 3) Select 'Floppy disk drive', insert the LSI Logic Windows 2003 SCSI driver disket