Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
ZAINSTALOWANO AUTOMATYCZNIE Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Polecane
Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowychWyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu. Pokaż jak
Ten sterownik jest niezgodny
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Zaloguj się do systemu Windows jako administrator, aby korzystać z funkcji automatycznego skanowania. Jeśli już zalogowano się jako administrator i ten komunikat jest widoczny, uruchom ponownie komputer. System jest zarządzany przez administratora IT, a jego funkcje mogą być ograniczone.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Poprawki i usprawnienia
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Więcej informacji• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Wersja
1.1.0.0, A00
Data wydania:
12 kwi 2010
Rodzaj pobierania
Aplikacje
Kategoria
System operacyjny
Priorytet
ZalecaneFirma Dell Technologies zaleca zastosowanie tej aktualizacji w następnym zaplanowanym cyklu aktualizacji. Aktualizacja obejmuje zmiany dotyczące utrzymywania ogólnego stanu systemu na odpowiednim poziomie. Zapewnia ona aktualność i zgodność oprogramowania systemowego z innymi modułami systemowymi (oprogramowaniem wewnętrznym, systemem BIOS, sterownikami i oprogramowaniem) oraz może zawierać inne nowe funkcje.
Dostępne formaty
Format pliku: Pakiet aktualizacji dla systemu MS Windows w wersji 32-bitowej
Nazwa pliku: APP_WIN_R255746.EXE
Rozmiar pliku: 4.21 MB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Pakiety aktualizacyjne firmy Dell w formacie dla 32-bitowego systemu Microsoft Windows można uruchamiać również w 64-bitowych wersjach systemu Microsoft Windows. Pakiety aktualizacyjne firmy Dell w formacie dla 64-bitowego systemu Microsoft Windows działają tylko w 64-bitowych wersjach tego systemu. Wybierając aktualizację sterownika urządzenia, upewnij się, że wybierasz wersję odpowiednią dla swojego systemu operacyjnego.
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5:
84EDDC6DD74CAD8EFBA0EE16E185B504
SHA1:
Niedostępne
SHA-256:
Niedostępne
Pobierając plik, akceptujesz warunki umowy licencyjnej na oprogramowanie firmy Dell. (w języku angielskim)
Obsługiwane systemy operacyjne
Windows Server 2008 x64
Instrukcje dotyczące instalacji
Custom Instructions for APP_WIN_R255746.EXE:
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
Pomoc i poradniki dotyczące sterowników
Więcej plików do pobrania znajdziesz na stronie Sterowniki i pliki do pobrania. Aby uzyskać pomoc dotyczącą korzystania z informacji na tej stronie, przejdź do strony Pomoc dotycząca sterowników i samouczki.