Dell MD3000i iSCSI RAID Controller, v.07.35.39.64, A13
ZAINSTALOWANO AUTOMATYCZNIE Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
#######################################################################
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Polecane
Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowychWyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu. Pokaż jak
Ten sterownik jest niezgodny
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Zaloguj się do systemu Windows jako administrator, aby korzystać z funkcji automatycznego skanowania. Jeśli już zalogowano się jako administrator i ten komunikat jest widoczny, uruchom ponownie komputer. System jest zarządzany przez administratora IT, a jego funkcje mogą być ograniczone.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Poprawki i usprawnienia
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Więcej informacji-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Wersja
07.35.39.64, A13
Data wydania:
26 wrz 2011
Rodzaj pobierania
Oprogramowanie wewnętrzne
Kategoria
iSCSI RAID
Priorytet
ZalecaneFirma Dell Technologies zaleca zastosowanie tej aktualizacji w następnym zaplanowanym cyklu aktualizacji. Aktualizacja obejmuje zmiany dotyczące utrzymywania ogólnego stanu systemu na odpowiednim poziomie. Zapewnia ona aktualność i zgodność oprogramowania systemowego z innymi modułami systemowymi (oprogramowaniem wewnętrznym, systemem BIOS, sterownikami i oprogramowaniem) oraz może zawierać inne nowe funkcje.
Dostępne formaty
Format pliku: Rozpakowuje pliki bezpośrednio na dysk lokalny
Nazwa pliku: MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip
Rozmiar pliku: 14.2 MB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten format pliku zawiera archiwum plików, które można zdekompresować do katalogu na dysku twardym. Z tego katalogu można następnie przeprowadzić instalację.
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5:
d907852c2f8ed6c6a9e779293fffd40f
SHA1:
Niedostępne
SHA-256:
Niedostępne
Pobierając plik, akceptujesz warunki umowy licencyjnej na oprogramowanie firmy Dell. (w języku angielskim)
Dotyczy
ASSY,ENCL,CTL,DX,MD3000I
ASSY,ENCL,CTL,SPL,MD3000I
Instrukcje dotyczące instalacji
Custom Instructions for MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip:
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Pomoc i poradniki dotyczące sterowników
Więcej plików do pobrania znajdziesz na stronie Sterowniki i pliki do pobrania. Aby uzyskać pomoc dotyczącą korzystania z informacji na tej stronie, przejdź do strony Pomoc dotycząca sterowników i samouczki.