Podczas aktualizowania systemu BIOS nie wyłączaj komputera ani nie odłączaj go od zasilania, ponieważ może to spowodować awarię. W trakcie aktualizacji komputer zostanie ponownie uruchomiony i na chwilę może pojawić się czarny ekran.
Przed aktualizacją należy zapoznać się z instrukcją instalacji i ważnymi informacjami podanymi poniżej.
Dell OptiPlex System BIOS, A10
ZAINSTALOWANO AUTOMATYCZNIE Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowychWyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu. Pokaż jak
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Poprawki i usprawnienia
1. ESCD is cleared when asset tag PASS:xx/xx changes.
2. Added ability to turn the USB controller on and off in setup.
3. Updated selectable boot capability. When a device is removed
its place in the boot list is saved in case it is ever readded.
4. Updated some CPU microcodes.
5. Added BBS calling interface to SMBIOS.
6. During NVRAM updates the reset and power buttons are now disabled.
7. Added support for 48-bit LBA disk drives.
8. System now beeps when CTRL-ALT-F10, or F12 is pressed
9. Fixed a few potential Plug & Play configuration errors.
10. Added a fix to allow certain cards (PERC/3) to work properly.
11. IRQ 12 is now reserved.
Wersja
Data wydania:
Rodzaj pobierania
Kategoria
Priorytet
OpcjonalniePobierając plik, akceptujesz warunki umowy licencyjnej na oprogramowanie firmy Dell. (w języku angielskim)
Usage:
-Download the file to your local hard drive.
-Run the file. (double-click on the file to extract the utility to the diskette.)
-Follow the onscreen instructions to create a FlashBIOS diskette.
-Shut down your computer and restart with the FlashBIOS diskette created above in diskette drive A:.
-Follow the onscreen instructions to upgrade your BIOS.
-When your system restarts, remove the diskette.
-The FlashBIOS upgrade is complete. BIOS upgrade process.
Executable files that do NOT begin with B (i.e. WS999A88.exe) are ‘non-packaged’ FlashBIOS programs that require being run under DOS.
Usage:
-Download the file to a bootable DOS-diskette.
-Shut down your computer and restart with the bootable DOS-diskette in diskette drive A:.
-Once the system has booted to that diskette, run the FLASHBIOS program (i.e. WS999A88), and follow the onscreen instructions to upgrade your BIOS.
-When your system restarts, remove the diskette.
-The FlashBIOS upgrade is complete. BIOS upgrade process.