Dell Device Managers for EMC Visual SAN, v.4.0, A01
ZAINSTALOWANO AUTOMATYCZNIE Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
Dell(TM) Device Managers is a plug-in for EMC(R) VisualSAN(R) 3.0.0, 3.0.0 SP1 and 4.0.0
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
Polecane
Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowychWyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu. Pokaż jak
Ten sterownik jest niezgodny
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Zaloguj się do systemu Windows jako administrator, aby korzystać z funkcji automatycznego skanowania. Jeśli już zalogowano się jako administrator i ten komunikat jest widoczny, uruchom ponownie komputer. System jest zarządzany przez administratora IT, a jego funkcje mogą być ograniczone.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Poprawki i usprawnienia
Dell Device Managers Version 4.0 for EMC VisualSAN 3.0.0, 3.0.0 SP1 and 4.0.0
Więcej informacjiWersja
4.0, A01
Data wydania:
19 mar 2004
Rodzaj pobierania
Aplikacje
Kategoria
Oprogramowanie SAN
Priorytet
OpcjonalnieFirma Dell Technologies zaleca sprawdzenie tej aktualizacji i ustalenie, czy dotyczy ona Twojego systemu. Aktualizacja zawiera zmiany wpływające tylko na niektóre konfiguracje lub oferuje nowe funkcje, które mogą, ale nie muszą mieć zastosowania w środowisku użytkownika.
Dostępne formaty
Format pliku: Format ZIP (zewnętrzne)
Nazwa pliku: R74063.EXE
Rozmiar pliku: 3.36 MB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten plik zawiera skompresowane archiwum lub zestaw plików. Pobierz plik do folderu na dysku twardym, a następnie uruchom go (klikając dwukrotnie), aby rozpakować zestaw plików. Postępuj według instrukcji, aby dokończyć instalację.
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5:
Niedostępne
SHA1:
Niedostępne
SHA-256:
Niedostępne
Pobierając plik, akceptujesz warunki umowy licencyjnej na oprogramowanie firmy Dell. (w języku angielskim)
Obsługiwane systemy operacyjne
Windows Server 2003
Windows 2000
Windows XP
Instrukcje dotyczące instalacji
Custom Instructions for R74063.EXE:
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or key to navigate and read the rest of the agreement, and click Yes to accept the agreement.
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Pomoc i poradniki dotyczące sterowników
Więcej plików do pobrania znajdziesz na stronie Sterowniki i pliki do pobrania. Aby uzyskać pomoc dotyczącą korzystania z informacji na tej stronie, przejdź do strony Pomoc dotycząca sterowników i samouczki.