ZAINSTALOWANO AUTOMATYCZNIEPlik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.
Zawartość tej strony mogła zostać automatycznie przetłumaczona. Aby przekazać opinię, wypełnij formularz znajdujący się w dolnej części strony.
Plik został automatycznie zainstalowany w ramach ostatniej aktualizacji. Jeśli występują jakiekolwiek problemy, możesz pobrać i ponownie zainstalować program ręcznie.
Dell Precision PERC 5/I Adapter Firmware release
Package Version: 5.2.2-0072
Polecane
Znajdź najlepsze pliki do pobrania dla swojego systemu
Wprowadź dane produktu, aby wyświetlić informacje o najnowszych sterownikach systemowych
Wyszukaj w zasobach wsparcia
Wprowadź kod Service Tag lub model produktu firmy Dell
Czy chcesz wyszukać produkt? Wprowadź identyfikator produktu.Pokaż jak
Nie znaleziono wyników. Nie udało się znaleźć wyszukiwanych informacji. Zmodyfikuj wyszukiwanie i spróbuj ponownie.
Ten sterownik jest niezgodny
Ten sterownik nie dotyczy wybranego produktu. Wybierz inny produkt, aby ponownie wprowadzić dane produktu dla tego sterownika, lub odwiedź stronę pomocy technicznej dotyczącej produktu, aby wyświetlić wszystkie sterowniki do innego produktu.
Zaloguj się do systemu Windows jako administrator, aby korzystać z funkcji automatycznego skanowania. Jeśli już zalogowano się jako administrator i ten komunikat jest widoczny, uruchom ponownie komputer.System jest zarządzany przez administratora IT, a jego funkcje mogą być ograniczone.
Znajdź więcej aktualizacji. Użyj narzędzia SupportAssist, aby wyszukać najnowsze aktualizacje sterowników swojego urządzenia.
Poprawki i usprawnienia
Package Version - 5.2.2-0072 Firmware Version - 1.03.50-0461 BIOS Version - MT28-9 Ctrl-R Version - 1.04-019A MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
Firma Dell Technologies zaleca zastosowanie tej aktualizacji w następnym zaplanowanym cyklu aktualizacji. Aktualizacja obejmuje zmiany dotyczące utrzymywania ogólnego stanu systemu na odpowiednim poziomie. Zapewnia ona aktualność i zgodność oprogramowania systemowego z innymi modułami systemowymi (oprogramowaniem wewnętrznym, systemem BIOS, sterownikami i oprogramowaniem) oraz może zawierać inne nowe funkcje.
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten plik zawiera skompresowane archiwum lub zestaw plików. Pobierz plik do folderu na dysku twardym, a następnie uruchom go (klikając dwukrotnie), aby rozpakować zestaw plików. Postępuj według instrukcji, aby dokończyć instalację.
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5:
Niedostępne
SHA1:
Niedostępne
SHA-256:
Niedostępne
Format pliku:Jeden lub więcej samorozpakowujących się obrazów dysków wewnątrz samorozpakowującego się archiwum zip
Nazwa pliku:BR189433.exe
Rozmiar pliku:1.53 MB
Jest to duży plik. Jego pobranie może zająć trochę czasu, w zależności od szybkości połączenia.
Opis formatu:
Ten plik zawiera skompresowane archiwum lub zestaw plików. Pobierz plik do folderu na dysku twardym, a następnie kliknij go dwukrotnie, aby rozpakować zestaw plików. Postępuj według instrukcji, aby dokończyć instalację.
1. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1. OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation 1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 2. Insert a blank diskette then click Continue. 3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1. 4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation 1. Get 2 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click the 'Continue' button on the self-extractor window after inserting one of the formatted floppies. 4. The utility prompts the user to insert the second floppy diskette after it completes writing on the first floppy. 5. Remove the first floppy and insert the second floppy diskette. 6. Press 'Continue' button. 7. After all the files have been copied to the last floppy disk, press the 'Finish' button to close the Self-Extracter window
Install 1. Insert the first (or the only) disk of the set into the Floppy drive. 2. Click Start, click Shutdown, click Restart, and then click OK. 3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 4. After flash is complete, remove bootable media. 5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell Bios Release Notes window appears.