Para ver mais informações úteis, consulte nossa base de conhecimento. Leia este artigo.
Dell ControlVault, v.1.2.00208.033, A08
INSTALADO AUTOMATICAMENTEEste ficheiro foi instalado automaticamente como parte de uma atualização recente. Se detetar algum problema, pode transferir e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este ficheiro foi instalado automaticamente como parte de uma atualização recente. Se detetar algum problema, pode transferir e reinstalar manualmente.
6.100.153 Production USH Firmware CID7
Recomendado
Encontre a melhor opção de download para seu sistema
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Pesquisar no suporte
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Fixes & Enhancements
- Functionality fixes / workaround for various Smart Cards - Fix for firmware lock when removing a Smart Card after being asked for a PIN - Fix for DOS upgrade error for systems with Upek sensor - Enumeration changes to disallow USB transactions until fully enumerated by the host
A Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, execute-o (dê dois cliques) para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
Custom Instructions for Dell_ControlVault_A08_R214858.exe:
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
----------------- UPDATE PROTECTION ----------------- Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
-------- DOWNLOAD -------- 1. Click Download Now, to download the file. 2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
---------------- EXTRACT FIRMWARE ---------------- 6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears. 7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx. 8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted. 9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------ Installation/Update From MS-DOS. ------------------------------------------ The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc) 11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation. 12. Shut down your computer and boot to the bootable MS-DOS disk 13. Switch to the folder that was created in step 11. 14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Windows XP. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system. 12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Vista. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. R